Read Panasonic PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 (serv.man2) Service Manual online
INF-3
SECTION 1 SERVICE INFORMATION
1. 2. Control panel
6
11
14
15
16
Projection direction
r
Bottom
r
Top
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
1
Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
6 <MENU> button
Displays or hides the main menu. (x page 46)
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (x page 41)
9 asqw buttons
Navigates the menu screen.
Adjusts the volume level (qw).
Adjusts the volume level (qw).
10 <AUTO SETUP> button
Automatically adjusts the image display position while
projecting the image. (x page 40)
projecting the image. (x page 40)
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
Chapter 1 Preparation - About your projector
ENGLISH
- 21
6
11
14
15
16
Projection direction
r
Bottom
r
Top
Attention
f
Do not block the ventilation ports (intake and exhaust) of the projector.
r Control panel and Indicators
1
Power button <v/b>
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
Sets the projector to the state where the projector is
switched off (standby mode). Also starts projection when
the power is switched off (standby mode).
2 Power indicator <ON(G)/STANDBY(R)>
Displays the status of the power.
3 Lamp indicator <LAMP>
Displays the status of the lamp.
4 Temperature indicator <TEMP>
Displays the status of the internal temperature.
5 Ambient Luminance sensor
Detects room's light and select proper image quality.
6 <MENU> button
Displays or hides the main menu. (x page 46)
7 <ENTER> button
Determines and executes an item in the menu screen.
8 <INPUT SELECT> button
Switches the input signal to project. (x page 41)
9 asqw buttons
Navigates the menu screen.
Adjusts the volume level (qw).
Adjusts the volume level (qw).
10 <AUTO SETUP> button
Automatically adjusts the image display position while
projecting the image. (x page 40)
projecting the image. (x page 40)
14 Control panel and Indicators
15 Lamp cover
The lamp unit is inside.
16 Vertical lens shift dial
Adjusts the vertical position of the projected image.
Chapter 1 Preparation - About your projector
ENGLISH
- 21
Click on the first or last page to see other PT-VZ570 / PT-VZ570D / PT-VZ570T / PT-VW530 / PT-VW530D / PT-VW530T / PT-VX600 / PT-VX600D / PT-VX600T / PT-VX60 (serv.man2) service manuals if exist.