PT-VZ570, PT-VZ570D, PT-VZ570T, PT-VW530, PT-VW530D, PT-VW530T, PT-VX600, PT-VX600D, PT-VX600T, PT-VX60 (serv.man2) - Panasonic Projector Service Manual (repair manual). Page 21

INF-15

Possible to control this projector by connecting PC to the LAN terminal on this projector.
Connection and command transmission changes depending on mode (admin password is set or not with web control).
Control according to the procedure in "4.2.2" on the protection mode (the password is set), and according to the procedure in 
"4.2.3" on the unprotected mode (the password is not set).

Computer

Projector

LAN cable (straight)

LAN cable (straight)

Hub

Note: LAN cable and Hub are not standard acces-
sories. When connected directly, cross type cable is 
recommended. It is possible to control by wireless 
LAN function.

1.  Obtain the IP address and port number (Initial setting value = 1024) of the projector and request for a connection to the 

projector.

  You can obtain both the IP address and the port number from the menu screen of the projector.
 - IP address  : Obtain from the main menu → [NETWORK] → [STATUS]

 - Port number  : Obtain from the WEB control → [Detailed set up] → [Command port set up] page
2. Check the response from the projector
 - Response data

Data section

Blank

Mode

Blank

Random number section

Termination symbol

"NTCONTROL"

(ASCII string)

' '

0x20

'1'

0x31

' '

0x20

"zzzzzzz"

(ASCII code hexadecimal number)

(CR)

0x0d

9 bytes

1 byte

1 byte

1 byte

8 bytes

1 byte

Mode: 1 = Protect mode

3. Generate a 32-byte hash value from the following data using MD5 algorithm.
 "xxxxxx:yyyyy:zzzzzzz"

xxxxxx

Administrator rights user name for Web control (default user name is “admin1”)

yyyyy

Password of above administrator rights user (default password is “panasonic”)

zzzzzzz

8-byte random number obtained in Step 2)

 

: colon : Separator