PT-VX505NU, PT-VX505NE, PT-VX505NEA, PT-VW435NU, PT-VW435NE, PT-VW435NEA (serv.man2) - Panasonic Projector Service Manual (repair manual). Page 7

Read Panasonic PT-VX505NU / PT-VX505NE / PT-VX505NEA / PT-VW435NU / PT-VW435NE / PT-VW435NEA (serv.man2) Service Manual online

Lamp cover switch (SW901)
The lamp cover switch (SW901) cuts off the drive signal to the lamp 
circuit when the lamp cover is removed or not closed completely. 
After opening the lamp cover for replacing the lamp assy, place the 
lamp cover correctly otherwise the projector can not turn on.
Thermal fuse (SW902)
There is a thermal fuse (SW902) inside of the projector to detect the 
internal temperature rising abnormally. When the internal tempera-
ture around lamp reaches near 113˚C, the thermal fuse will open to 
cut off the power supply to the lamp power circuit.
If the thermal fuse opens, the projector cannot turn on. Thermal 
fuse replacement is required. 
This projector provides the following circuit protections to operate in safety. If the abnormality occurs inside the pro-
jector, it will automatically turn off by operating one of the following protection circuits.
Circuit Protections
Fuse (F601)
A  fuse  is  located  inside  of  the  projector.  When  the  ON(G)/
STANDBY(R)  indicator  is  not  lighting,  the  fuse  may  be  opened. 
Check the fuse as following steps.
The fuse should be used with the following type;
Fuse Part No.: 423 035 3004
How to replace the fuse
1.  The fuse is placed on the AC 1ST FILTER board. Remove the 
cabinet  top,  MAIN&AV  board  following  the  "Mechanical  Disas-
sembly" . 
2.  Take  the  fuse  off  ,  and  replace  the  old  one  with  the  specified 
Fuse Part No, : 424 007 3909
SKY-GATE, Ltd. TYPE SG5013008P-R
Thermal fuse 
Lamp cover switch 
Page of 127

Click on the first or last page to see other PT-VX505NU / PT-VX505NE / PT-VX505NEA / PT-VW435NU / PT-VW435NE / PT-VW435NEA (serv.man2) service manuals if exist.