Read Panasonic PT-VW350 / PT-VW350D / PT-VW350T / PT-VX420 / PT-VX420D / PT-VX420T / PT-VX421 Service Manual online
INF-12
SECTION 1 SERVICE INFORMATION
(1) – Software version of each microprocessor
MM: Main microprocessor, SM: Sub microprocessor,
NT: Network microprocessor
(2) – Input signal name
(3) – Input signal frequency (Horizontal / Vertical)
(4) – Temperature error check
(5) – Temperature at sensors (Celsius)
(2) – Input signal name
(3) – Input signal frequency (Horizontal / Vertical)
(4) – Temperature error check
(5) – Temperature at sensors (Celsius)
INTK (Intake air) / OPTI (Optical module)
EXST (Exhaust air) / FLTR (Filter clogged)
EXST (Exhaust air) / FLTR (Filter clogged)
(6) – Correction value of clogged sensor.
(7) – Fan rotation check
(7) – Fan rotation check
INTK (Intake fan) / LAMP (Lamp fan) / EXST (Exhaust fan)
(8) – Iris error check (NG: error)
(9) – lamp error check (NG: error)
(10) – Lamp memory communication check (NG: error)
(11) – Projector accumulated runtime
(12) – Converted lamp runtime / Lamp on times
(9) – lamp error check (NG: error)
(10) – Lamp memory communication check (NG: error)
(11) – Projector accumulated runtime
(12) – Converted lamp runtime / Lamp on times
Current / 1 time before reset / 2 times before reset
(13) – Projector serial no.
(14) – Version no. of FPGA (for VX420.VW350)
(15) – Version no. of emulate software (when selecting other
(14) – Version no. of FPGA (for VX420.VW350)
(15) – Version no. of emulate software (when selecting other
company). [--] means not set.
(16) – Status of correction data in the memories
G-SAVED: Gamma correction data
U-SAVED: Color shading correction data
(17) – Temperature at sensors (Celsius) when the latest shut-
down occurred by temp error.
INTK (Intake air) / OPTI (Optical module)
EXST (Exhaust air) / FLTR (Filter clogged)
EXST (Exhaust air) / FLTR (Filter clogged)
(18) – Status of lamp replacement time
NG: Lamp runtime exceeds 5000H at lamp power high
(19) – Lamp runtime reset times
(20) – Actual lamp runtime
(20) – Actual lamp runtime
Current / last time reset / 2nd last time reset
8. SELF CHECK
• Displays the self diagnostic information
9. TEST PATTERN
• Displays test patterns of White/Red/Green/Blue raster signals
- Change the patterns by up down buttons, Change the color by left right buttons.
- Change the patterns by up down buttons, Change the color by left right buttons.
10. FLICKER ADJUST
• Perform the flicker adjustment
11. MODEL NO. SETTING
• Setting up the model no. of the projector.
12. PANEL TYPE SETTING
• Setting up the LCD panel type (L-Type or R-Type).
13. FAN VOLT ADJUST
• Adjust the fan voltage.
14. INPUT AUTO CALIBRATION
• Perform the auto calibration of input signal level. (For factory inspection purpose)
15. WHITE BALANCE ADJUST
• Adjust the white balance.
16. KEYSTONE CALIBRATION
• Perform the auto keystone calibration.
17. CLOG SENSOR CALIBRATION
• Perform the calibration of clogged sensor circuit.
For Items 10 to 17 of calibration and adjustment, refer to the "SECTION 3 <Adjustment>" for the procedure.
* The display information varies depending on the input signal and
version of the software.
* The word "OK" of Items (TEMP/FAN/MECHANICAL/LAMP)
would be indicated in red if the projector had shutdown due to
abnormality last time.
abnormality last time.
5'.(%*'%-
50&$
//
5/
06(((
:)#
:)#
'/7.#6'
-*<
)5#8'&
1-
*<
75#8'&
1-
6'/2
6'/2
6'/2
1-
+06-
+06-
':56
':56
126+
126+
(.64
(.64
(.645'05141((5'6
(#0
+06-
+06-
1-
':56
1-
.#/2
1-
/'%*#0+%#.
+4+5
+4+5
1-
.#/2
.#/2
.#/2
1-
*
1-
/'/14;
1-
70+6*+5614;
616#.
616#.
*
4'5'6
*
*
*
*
*
*
(1)
(13)
(15)
(14)
(16)
(17)
(18)
(19)
(20)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(10)
(11)
(12)
(9)
Click on the first or last page to see other PT-VW350 / PT-VW350D / PT-VW350T / PT-VX420 / PT-VX420D / PT-VX420T / PT-VX421 service manuals if exist.