Read Panasonic PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA Service Manual online
ADJ-26
SECTION 3 ADJUSTMENTS
2. 3. Network CPU Software Update
2. 3. 1. Required equipment
1. PC : Use for software transfer
2. Communication cable : Straight LAN cable (use cross cable if
PC and projector is connected directly)
3. Software&data : Software for network CPU software& firmware
data
(Download from the projector service homepage.)
2. 3. 2. Preparation
1. Extract the software and data package to your favorite directory
on your computer.
2. Connect the LAN cable to the projector and setup the network
setting. Make a memo for projector's IP address.
3. Setup the PC's IP address in the same sub-net group.
4. With user menu, setup the standby mode to "Normal" and set the projector into the standby.
2.3.3. Update procedure
1. Press and hold the [POWER] and [SUTO SETUP] button on the projector at the same time and then connect the AC code.
The projector is in the network software writing mode.
2. Start up the writing software [FTPTool(v7.3).exe] and setup the IP address, user, and password.
3. Choose the updating firmware (hex file) in the extracted folder by the file selection window right, and click [Write] to start
writing of firmware. After completing the writing, the dialog window will appear as below.
<note>: Do not turn the projector off or disconnect the LAN cable during the writing. DO not click [Stop] or [Exit] button during writ-
ing
* Turn the projector on and display the [EXTRA OPTION] menu. Confirm that the version of the network software is updated
correctly on the [Self Check] item.
Computer
Projector
LAN cable (straight)
LAN cable (straight)
Hub
IP address : Projector's IP address
user
: pjmanager
password : vx410
Click on the first or last page to see other PT-VW340Z / PT-VW340ZD / PT-VX410Z / PT-VX410ZD / PT-VX46EA / PT-VX406EA service manuals if exist.