Read Panasonic PT-VMZ60 / PT-VMZ50 / PT-VMZ40 / PT-VMW60 / PT-VMW50 (serv.man3) Service Manual online
5
PREFACE
<VMZ60/VMZ50/VMZ40/VMW60/VMW50>
CONTENTS
1. Safety Precautions
1.1. General Guidelines
1.2. Leakage Current Check
1.2. Leakage Current Check
2. Specifications
SECTION 1 SERVICE INFORMATION
1. The name of each part
1.1. Remote controls
1.2. Projector body
1.3. Control panel
1.4. Connecting terminals
1.2. Projector body
1.3. Control panel
1.4. Connecting terminals
2. Menu Navigation
2.1. On-screen
3. Service Mode
3.1. Setting to Service Mode
3.2. Resetting to User Mode
3.3. Functions of Service Mode
3.2. Resetting to User Mode
3.3. Functions of Service Mode
4. Notes on service
4.1. Before service operation
4.2. Service
4.3. Note on the parts replacement work
4.4. Replacement of consumable parts
4.5. Security password
4.2. Service
4.3. Note on the parts replacement work
4.4. Replacement of consumable parts
4.5. Security password
5. Troubleshooting
5.1. LIGHT/TEMP indicators
5.2. Shutdown system
5.3. Execution procedure of Self-diagnosis
5.4. Log error code
5.5. Troubleshooting
5.2. Shutdown system
5.3. Execution procedure of Self-diagnosis
5.4. Log error code
5.5. Troubleshooting
SECTION 2 DISASSEMBLY PROCEDURES
1. Parts Location
1.1. Electrical parts location (P.C.Boards)
1.2. Electrical parts location (Fans)
1.3. Mechanical parts location
1.4. Optical parts location
1.2. Electrical parts location (Fans)
1.3. Mechanical parts location
1.4. Optical parts location
2. Disassembly Instructions
r
Disassembly flow chart
2.1. Air filter cover, Air filter unit removal
2.2. Top cover removal
2.3. Terminal cover & A-PCB block removal
2.4. Front cover removal
2.5. Power box and K-PCB/Inlet removal
2.6. S-PCB, LD duct top, LD fan removal
2.2. Top cover removal
2.3. Terminal cover & A-PCB block removal
2.4. Front cover removal
2.5. Power box and K-PCB/Inlet removal
2.6. S-PCB, LD duct top, LD fan removal
2.7. Disassembling order of LD unit replacement
2.8. LD case block removal
2.9. Lighting block removal
2.10. Parts location and direction in the lighting case
2.11. LCD duct removal
2.12. M1-PCB and LCD fans removal
2.8. LD case block removal
2.9. Lighting block removal
2.10. Parts location and direction in the lighting case
2.11. LCD duct removal
2.12. M1-PCB and LCD fans removal
<Cable Connections>
SECTION 3 ADJUSTMENTS
1. Adjustment Items and Procedures
1.1. Lighting area adjustment
1.2. Polarizer adjustment
1.3. Adjusted data transfer
1.4. Panel type setting
1.5. Flicker adjustment
1.6. Model No. setting
1.7. Clog sensor calibration
1.8. White balance adjustment
1.9. Acceleration calibration
1.10. Ghost feedback calibration
1.11. LD unit runtime reset
1.12. Chromaticity adjustment
1.13. Vertical bar correction adjustment
1.2. Polarizer adjustment
1.3. Adjusted data transfer
1.4. Panel type setting
1.5. Flicker adjustment
1.6. Model No. setting
1.7. Clog sensor calibration
1.8. White balance adjustment
1.9. Acceleration calibration
1.10. Ghost feedback calibration
1.11. LD unit runtime reset
1.12. Chromaticity adjustment
1.13. Vertical bar correction adjustment
2. Firmware Update Procedure
2.1. Firmware update(Network)
2.2. Firmware update(USB memory)
2.2. Firmware update(USB memory)
Click on the first or last page to see other PT-VMZ60 / PT-VMZ50 / PT-VMZ40 / PT-VMW60 / PT-VMW50 (serv.man3) service manuals if exist.