Read Panasonic PT-TX400 / PT-TX310 / PT-TW340 / PT-TX210 / PT-TW250 (serv.man3) Service Manual online
-68-
J
Basic format
Data sent from PC is transmitted in the order of STX, instruction, parameter and ETX. Add parameters
according to the control details.
STX
C1
C2
C3
:
P1
P2
Pn
ETX
:
½ When the instruction sent has no parameter, no (:) is needed.
End
(one character)
Parameter
(the length is
uncertain)
Colon
(one character)
3 command
characters
(3 characters)
Start
(one character)
STX
C1 C2 C3
:
ETX
Basic format (with sub-command)
Same as the basic format
Sub-command (five characters)
Parameter (six characters)
"+" or "-" symbol (one character) and set
value or adjustment value (five characters)
"+" or "-" symbol (one character) and set
value or adjustment value (five characters)
Operate (one character)
"=" (set to the value specified by parameters)
"=" (set to the value specified by parameters)
*: Operation (E) and parameters are not needed when an instruction that does not need
parameters is transmitted.
S1
S2
S3
S4
S5
E
P1
P2
P3
P4
P5
P6
Serial control
Click on the first or last page to see other PT-TX400 / PT-TX310 / PT-TW340 / PT-TX210 / PT-TW250 (serv.man3) service manuals if exist.