Read Panasonic PT-TW371R (serv.man3) Service Manual online
ADJ-18
SECTION 3 ADJUSTMENTS
<TW370/TX430/TX340>
4. 2. Sub CPU Software Update
1. Required equipment
1. PC : Use for software transfer
2. Communication cable : D-sub 9Pin (male/female RS-232C straight)
3. Software&data : [Serial Bootloader AN1310] package data (Download from the projector service home page.)
2. Preparation
1. Extract the software and data package to your favorite directory on your PC. There are several files in the folder as below.
2. Connect the serial terminal of projector and PC with an RS-232C cable.
3. Upgrading procedure
1. Start [AN1310ui.exe] in the [Serial Bootloader AN1310]
folder.
2. Setup the communication port by selecting menu [Program] - [Settings].
3. Click the [Break/Reset Mode] button to enter the upgrading mode.
COM Port
: Available port
Bootload Baud Rate
:19200 bps
Application Baud Rate
:115200 bps
Write Options
: Flash Program Memory
EEPROM
Communication cable (straight)
D-Sub 9p (Male)
D-Sub 9p (Female)
Projector Connection terminals
Computer
- AN1310ui.exe
Sub firmware upgrading software
- A3_SUB_appcode_V05.50.hex Firmware hex file
Click on the first or last page to see other PT-TW371R (serv.man3) service manuals if exist.