PT-TW370, PT-TX430, PT-TX340 - Panasonic Projector Service Manual (repair manual). Page 14

Read Panasonic PT-TW370 / PT-TX430 / PT-TX340 Service Manual online

INF-4
SECTION 1 SERVICE INFORMATION
<TW370/TX430/TX340>
Cleaning the air filter unit
Remove the air filter unit beforehand according to the previously described procedure in “Removing the air filter unit.
1) Clean the air filter unit.
 
f
Vacuum dirt and dust from the air filter unit.
 
f
 Do not wash the air filter unit.
Attaching the air filter unit
1) Attach the unused air filter unit to the air filter cover.
 
f
 There is a distinction between the inside and outside of the air filter unit. Align the red mark on the air filter unit with the 
red mark on the air filter cover.
 
f
 Insert the air filter unit to the side with the two hooks and then press the other side of the air filter unit into the cover side 
with one hook.
2) Attach the air filter cover to the projector.
 
f
 Perform  Step 
1) in “Removing the air filter unit” of the operating Instructions in the reverse order.
 
f
 Make sure that the air filter cover is closed tightly.
Resetting the filter counter
Be sure to reset the filter counter after cleaning the air filter unit.
1)  Connect the power plug, press the power < v/b> button.
2)  Press the <MENU> button to display the main menu, then press 
to select [Expand].
3)  Press the <INPUT/ENTER> button on the control panel or the <ENTER> button on the remote control, then 
     press 
to select [Filter counter].
4)  Press the <INPUT/ENTER> button on the control panel or the <ENTER> button on the remote control, then 
     press 
 to select [Filter counter reset].
5)  Press the <INPUT/ENTER> button on the control panel or the <ENTER> button on the remote control.
 
f
The [Filter counter reset ?] confirmation message is displayed.
6)  Press  to select [Yes], then press the <INPUT/ENTER> button on the control panel or the <ENTER> button 
     on the remote control.
 
f
The [
OK?] screen is displayed.
7)  Press  to select [Yes], then press the <INPUT/ENTER> button on the control panel or the <ENTER> button 
     on the remote control.
 
f
The filter counter is reset and the filter usage time becomes 0 hour. 
Attention
 
f
Do not disassemble the air filter unit.
 
f
When attaching the air filter unit, make sure that the projector is stable, and work in an environment that is safe,   
   even in the event of the air filter unit dropping.
 
f
Make sure that the air filter unit is properly attached before using the projector. If it is not attached, the projector 
    will suck in dirt and dust causing a malfunction.
Inside (Smooth fibre)
Outside (Cotton-like fibre)
Air filter cover
Air filter cover
Air filter unit
Red mark
Red mark
Hook
Hook
Air filter unit
Page of 68
Display

Click on the first or last page to see other PT-TW370 / PT-TX430 / PT-TX340 service manuals if exist.