Read Panasonic PT-RZ870 Service Manual Simplified online
1-chip DLP Based Projector
ORDER NO. VED1807709AE
■ This manual is common to the models regardless of suffixes of the Model No.
ffor Taiwan
BT: Black model, the standard zoom lens supplied
ffor India
BD: Black model, the standard zoom lens supplied
LBD: Black model, the lens sold separately
ffor Korea
B: Black model, the standard zoom lens supplied
W: White model, the standard zoom lens supplied
ffor Asia (except for Taiwan, India, Korea) / Oceania / Africa
BA/B: Black model, the standard zoom lens supplied
LBA/LB: Black model, the lens sold separately
WA/W: White model, the standard zoom lens supplied
LWA/LW: White model, the lens sold separately
ffor other countries or regions
B: Black model, the standard zoom lens supplied
LB: Black model, the lens sold separately
W: White model, the standard zoom lens supplied
LW: White model, the lens sold separately
Model No.
PT-RZ870
■ This model is based on PT-RZ 970, the light output is changed to 9 400 lm → 8 000 lm.
■ Please file and use this manual together with the service manual for Model No. PT-RZ970 series order No.VED1606614CE.
■ 7 The service engineer is required to read and follow the "Safety Precautions" and "Important Safety Notice" in
PT-RZ970 series service manual.
■ For the replacement parts, refer to the separated booklet "Parts List".
■ Point of specifications difference from PT-RZ970 are as follows.
7
WARNING
This service information is designed for experienced repair technicians only and is not designed for use by the general public.
It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Prod-
the product or products dealt with in this service information by anyone else could result in serious injury or death.
Specification
PT-RZ870
PT-RZ970
Power consumption
950 W (9.9 A - 4.5 A)
950 W (9.0 A - 4.5 A) *1
1 050 W (10.4 A - 5.0 A)
1 050 W (9.5 A) *1
Light output *2
8 500 lm *3,
8 800 lm (center) *4
9 400 lm *3,
10 000 lm (center) *4
*1 The suffix of model number is "BT" only.
*2 Both values are measured when [OPERATING MODE] is set to [NORMAL].
*3 Measurement, measuring conditions, and method of notation comply with ISO/IEC 21118:2012 international standards.
*4 The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the ISO/
IEC 21118:2012 international standards.
Display
