Read Panasonic PT-RZ670 / PT-RW630 (serv.man3) Other Service Manuals online
SECTION 3 ADJUSTMENTS
< RZ670/RW630 >
2. Software Update procedure
* Update the software by connecting to a serial terminal or LAN terminal. (DIGITAL LINK software is serial connection only)
* Usually recommend LAN terminal connection. (quick to update)
2. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2. Communication cable
D-sub 9pin (male/female RS-232C straight)
LAN cable. (When connecting directly, use a cross cable)
3. Service Software : [MainSubNet Update Tool.exe] Download from the projector service Web (PASS).
4. Microprocessor Software: Download the software file from the projector service Web (PASS) to the PC.
2. 2. Connection Preparations
1. Check the settings of the projector.
1) The [INPUT SELECT] of sub menu [RS-232C] must be set according to the connection method.
2) The [EMULATE] of sub menu [RS-232C], is select to [DEFAULT]. (in service mode)
3) Check the RS-232C settings (ID, Baudrate and Parity) and take a note.
1) The [DIGITAL LINK MODE] of sub menu [NETWORK], is select to [AUTO] or [ETHERNET].
2) Check the network IP address of the projector and take a note.
3) Set the IP address of computer to approximate value of projector IP address.
・If you have changed the each menu settings, please return settings of the original (customers) after work.
・Set up your computer not to standby or shutdown.
・Set up your computer not to standby or shutdown.
2. Connect the projector and the PC by using a communication cable.
2. 3. Update procedure
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Activate service software (MainSubNet Update Tool.exe) on a computer, and select Model, then click the [OK] button.
[Note]
Serial terminal connection
LAN terminal connection
Serial terminal connection
LAN terminal connection
Serial terminal connection
LAN terminal connection
ADJ - 11
Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man3) service manuals if exist.