PT-RZ670, PT-RW630 (serv.man18) - Panasonic Projector Service Manual (repair manual). Page 12

Read Panasonic PT-RZ670 / PT-RW630 (serv.man18) Service Manual online

SECTION 1  SERVICE  INFORMATION
< RZ670/RW630 >
  1. 2. Control panel
  1. 3. Connecting terminals
9
10
11
12
13
14
2
4
3
1
5
6
7
8
1  Power on <
b> button
Starts projection when the <MAIN POWER> switch on the 
projector is set to <ON> when the power is switched off 
(standby mode).
2  Power standby <
v> button
Sets the projector to the state where the projector is switched 
off (standby mode) when the <MAIN POWER> switch on the 
projector is set to <ON> and in projection mode.
3 <RGB1> 
button
Switches the input to RGB1.
4 <RGB2> 
button
Switches the input to RGB2.
5 <DVI-D> 
button
Switches the input to DVI-D.
6 <HDMI> 
button
Switches the input to HDMI.
7  <DIGITAL LINK> button
Switches the input to DIGITAL LINK.
8 <SDI> 
button
Switches the input to SDI.
(Only for PT-RZ670)
9 <MENU> 
button
Displays or hides the main menu. 
 
 
Returns to the previous menu when a sub-menu is displayed.
If you press the <MENU> button on the control panel for at least 
three seconds while the on-screen display is off (hidden), the 
on-screen display is turned on.
10 <LENS> 
button
Adjusts the focus, zoom, and shift (position) of the lens.
11 <ENTER> 
button
Determines and executes an item in the menu screen.
12 <SHUTTER> 
button
Used to temporarily turn off the image. 
 
 
13 
asqw buttons
Used to select items in the menu screen, change settings, and 
adjust levels.
Also used to enter a password in [SECURITY] or enter 
characters.
14  <AUTO SETUP> button
Automatically adjusts the image display position while projecting 
the image. [PROGRESS] is displayed while in automatic 
adjustment.
  
1
2
3
4
5
6
7
8
9
10
1  <REMOTE 1 IN> terminal/<REMOTE 1 OUT> terminal
These are the terminals to connect the remote control for serial 
control in a multiple projector environment.
2  <REMOTE 2 IN> terminal
This is a terminal to remotely control the projector using the 
external control circuit.
3  <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control 
the projector by connecting a computer.
4  <SERIAL OUT> terminal
This is a terminal to output the signal connected to the <SERIAL 
IN> terminal.
5  <SDI IN> terminal
This is the terminal to input SDI signals.
(Only for PT-RZ670)
6  <RGB 1 IN> (<R/P
R
/VIDEO>, <G/Y>, <B/P
B
/C>, <SYNC/HD>, 
<VD>) terminals
These are terminals to input RGB signals, YC
B
C
R
/YP
B
P
R
 
signals, Y/C signals, or video signals.
7  <RGB 2 IN> terminal
This is a terminal to input RGB signals or YC
B
C
R
/YP
B
P
R
 signals.
8  <DVI-D IN> terminal
This is the terminal to input DVI-D signals.
9  <HDMI IN> terminal
This is the terminal to input HDMI signals.
10  <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is also 
used when connecting a video signal transmission device via 
the LAN terminal.
Attention
 
f When a LAN cable is directly connected to the projector, the network connection must be made indoors.
INF - 3
Page of 115
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man18) service manuals if exist.