Read Panasonic PT-RZ670 / PT-RW630 (serv.man13) Other Service Manuals online
SECTION 2 DISASSEMBLY PROCEDURES
< RZ670/RW630 >
3. 1) Remove the fixing screws of the each terminals. (6 screws)
2) Unscrew the 5 screws and remove the DG-P.C.Board.
The DG-P.C.Board is directly connected to the A-P.C.Board with the connector. Be careful when removing.
3) Unscrew the 1 screw and remove the M1-P.C.Board.
4. 1) Remove the fixing screws of the each terminals. (8 screws)
2) Unscrew the 5 screws and remove the A-P.C.Board.
2. 6. Removal of LD Driver Block (D-P.C.Board / DR-P.C.Board)
1. Remove the signal processing block according to the section 2.5 "Removal of Signal Processing Block
(DG-P.C.Board / A-P.C.Board)".
2. Unscrew the 3 screws and remove the Exhaust fan block.
Note :
DG-P.C.Board
M1-P.C.Board
Terminal metal panel
Terminal metal panel
A-P.C.Board
Exhaust fan Block
5
1
6
5
1
2
4
1
3
DIS-9
Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man13) service manuals if exist.