PT-RZ670, PT-RW630 (serv.man10) - Panasonic Projector Other Service Manuals (repair manual). Page 3

Read Panasonic PT-RZ670 / PT-RW630 (serv.man10) Other Service Manuals online

SECTION 3  ADJUSTMENTS
< RZ670/RW630 >
3. project the all-white of the internal test pattern.
4. Adjust the horizontal direction of the lighting area with a adjustment screw (1).
5. Adjust the vertical direction of the lighting area with a adjustment screw (2).
6. After adjustment completion, tighten two fixation screws.
7. Fix up the adjustment sheet.
  1. 2. Lens calibration
1. Select sub menu [LENS CALIBRATION] of main menu [PROJECTOR SETUP].
2. The confirmation screen is displayed.  Select [OK] and press the <ENTER> button.
3. The lens moves up, down, left, and right to automatically set the lens shift limit values and home position.
・ [PROGRESS] is displayed on the menu during lens calibration.
4. When the lens has been completely stopped, calibration is complete.
・ When lens calibration executes correctly, [COMPLETE] is displayed and [INCOMPLETE] is displayed 
when it does not execute correctly.
・ If it is displayed as [INCOMPLETE], retry the procedure from step 1.
  1. 3. Auto index calibration
1. Move into service mode.
2. Select sub menu [CONVERGENCE] of main menu [EXTRA OPTION] and select [OK].
Lighting area
Effective area
Adjustment screw (1)
Adjustment screw (2)
ADJ - 3
Page of 14
Display

Click on the first or last page to see other PT-RZ670 / PT-RW630 (serv.man10) service manuals if exist.