PT-RZ570 (serv.man2) - Panasonic Projector Service Manual (repair manual). Page 75

ADJ-14

*  Software updating can be done via the LAN terminal or the serial terminal. (Updating of DIGITAL LINK software can be done 

via the serial terminal only.)

1. Computer : Use it for runtime reset  with service tool.

2. Communication cable : 

 

3. Service Software : [MainSubNet Update Tool.exe] Download from the projector service Web (PASS).

4. Firmware software : Download the software file from the projector service Web (PASS) to the PC.

1. Check the settings of the projector.

    

Serial terminal connection

  1) The [INPUT SELECT] of sub menu [RS-232C] must be set according to the connection method.

  2) The [EMULATE] of sub menu [RS-232C], please set to [DEFAULT]. (in service mode)

  3) Check the RS-232C settings (ID, Baudrate and Parity) and take a note.

         

LAN terminal connection

  1) Check the network IP address of the projector and take a note.

  2) Set the IP address of computer to approximate value of projector IP address.

  3) When connecting using DIGITAL LINK compatible device.

      The [DIGITAL LINK MODE] of sub menu [NETWORK], please set to [AUTO] or [ETHERNET].

  [Note]

   • If you have changed the each menu settings, please return settings of the original (customers) after work.

2. Connect the projector and the PC by using a communication cable.

1. Switch the projector to "Normal-Standby" mode (STANDBY/ON indicator is lighting in red).
2. Activate a [MainSubNet Update Tool.exe] service software and select the Model No., then click the [OK] button.

Serial terminal connection

LAN terminal connection

Computer

Projector

Communication cable

D-Sub 9P

(male)

Computer

Projector

LAN cable

 (straight)

LAN cable

 (straight)

Hub

Serial terminal connection

  D-sub 9pin (male/female RS-232C straight)

LAN terminal connection

  LAN cable (When connecting directly, use a cross cable)