Read Panasonic PT-RZ475U / PT-RZ475E / PT-RZ475EA Service Manual online
1. 3. Connecting terminals
1. 4. Remote control
9
1
2
3
4
5
8
7
1 <DIGITAL LINK/LAN> terminal
This is the LAN terminal to connect to the network. This is
also used when connecting an audio and video signal sending
device via the LAN terminal.
also used when connecting an audio and video signal sending
device via the LAN terminal.
2 <HDMI IN> terminal
This is the terminal to input HDMI signals.
3 <DVI-I IN> terminal
This is the terminal to input DVI-D and DVI-A signals (RGB
signal or YC
signal or YC
B
C
R
/YP
B
P
R
).
4 <COMPUTER IN> terminal
This is the terminal to input RGB or YC
B
C
R
/YP
B
P
R
signals from
a computer.
5 <VIDEO IN> terminal
This is the terminal to input video signals.
6 <AUDIO IN> terminal
This is the terminal to input audio signals.
7 <VARIABLE AUDIO OUT> terminal
This is the terminal to output audio signals input to the projector.
8 <SERIAL IN> terminal
This is the RS-232C compatible terminal to externally control
the projector by connecting a computer.
the projector by connecting a computer.
9 <3D SYNC> terminal
This terminal is used to connect an IR transmitter to the
projector.
projector.
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Attach a strap according to
usage condition.
usage condition.
Front
Top
1 Remote control indicator
Flashes if any button in the remote control is pressed.
2 Power
<
v/b> button
Sets the projector to the standby mode when the <MAIN
POWER> switch on the projector is set to <ON>. Also sets the
projector in projection mode when the power is switched off
(standby mode).
POWER> switch on the projector is set to <ON>. Also sets the
projector in projection mode when the power is switched off
(standby mode).
3 Input selection (<COMPUTER>, <DVI-I>, <VIDEO>,
<DIGITAL LINK>, <HDMI>) buttons
Switches the input signal to project.
Also used to set the ID number of the remote control and
security password.
Switches the input signal to project.
Also used to set the ID number of the remote control and
security password.
4 <MENU>
button
Displays the main menu.
5 <FREEZE>
button
Used to pause a video and mute the audio.
6 <DEFAULT>
button
Resets the content of the sub-menu to the factory default.
7 <FUNC1> - <FUNC3> buttons
Assigns a frequently used operation to the <FUNC1> button or
the <FUNC2> button as a shortcut button.
The display operation of the focus adjustment screen is
assigned to the <FUNC3> button.
the <FUNC2> button as a shortcut button.
The display operation of the focus adjustment screen is
assigned to the <FUNC3> button.
8 <ID SET> button
Sets the ID number of the remote control to use for a system
using multiple projectors.
using multiple projectors.
9 <ID
ALL>
button
Used to simultaneously control all the projectors with one
remote control for a system using multiple projectors.
remote control for a system using multiple projectors.
10 <AUTO SETUP> button
Automatically adjusts the image display position while projecting
the image.
[PROGRESS] is displayed on the screen while adjusting
automatically.
the image.
[PROGRESS] is displayed on the screen while adjusting
automatically.
11
asqw buttons/<RETURN> button/<ENTER> button
Used to navigate through the menu screen.
Also used to enter a password in [SECURITY] or enter
characters.
Used to navigate through the menu screen.
Also used to enter a password in [SECURITY] or enter
characters.
12 <AV MUTE> button
Used to temporarily turn off the audio and video.
13 <ECO>
button
Displays the setting screen related to ECO management.
14 <VOLUME+>/<VOLUME-> button
Adjusts the audio output volume.
15 Strap
hole
16 Remote control signal transmitter
INF - 3
Click on the first or last page to see other PT-RZ475U / PT-RZ475E / PT-RZ475EA service manuals if exist.