Read Panasonic PT-RZ470U / PT-RZ470E / PT-RZ470EA / PT-RW430U / PT-RW430E / PT-RW430EA (serv.man3) Service Manual online
ADJ - 6
6. Select the save place and click the [Save(S)] button.
7. When the progress bar reaches the right-side end, the save of data is completion.
Select "File" → "Quit", and please be finished.
1. 3. 4. Restore the Backup EEPROM data (After circuit board exchange)
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software ［DataLogBackup.exe］ with a computer.
3. Select "Option " → "Setting" and set Serial Port of the computer, Baud Rate and Parity.
4. Select a model number and ID.
6. Select the file and click the [OPEN(O)] button.
7. When the progress bar reaches the right-side end, the save of data is completion.
Select "File" → "Quit", and please be finished.
8. If the restoration of data is completed, turn the MAIN POWER off then MAIN POWER on.
5. 1) Select "Backup" (an EEPROM).
2) Checkmark in "REPLACE A-PWB" of "COPY MODE".
3) Click an [WRITE EEPROM] button.
2) Checkmark in "REPLACE A-PWB" of "COPY MODE".
3) Click an [WRITE EEPROM] button.
①
②
③
Click on the first or last page to see other PT-RZ470U / PT-RZ470E / PT-RZ470EA / PT-RW430U / PT-RW430E / PT-RW430EA (serv.man3) service manuals if exist.