Read Panasonic PT-RZ31K / PT-RS30K Service Manual online
7
PREFACE
<RZ31K/RS30K>
2. Specifications
2.1 Specifications
Chapter 7
Appendix — Specifications
ENGLISH - 233
Specifications
The specifications of the projector are as follows.
Power supply
PT-RZ31K, PT-RS30K
100 V - 120 V / 200 V - 240 V ~ (100 V - 120 V / 200 V - 240 V
alternating current), 50 Hz/60 Hz
PT-RZ31KD
200 V - 240 V ~ (200 V - 240 V alternating current), 50 Hz/60 Hz
Power consumption
PT-RZ31K, PT-RS30K
2 870 W (12 A/16 A)
PT-RZ31KD
2 870 W (16.1 A)
Power consumption (during
standby)
standby)
When [STANDBY MODE] is set to [ECO]: 0.3 W
When [STANDBY MODE] is set to [NORMAL]: 4 W
When [STANDBY MODE] is set to [NORMAL]: 4 W
DLP chip
Size
PT-RZ31K
24.4 mm (0.96") (aspect ratio 16:10)
PT-RS30K
24.1 mm (0.95") (aspect ratio 4:3)
Display system
DLP chip x 3, DLP projection system
Number of pixels
PT-RZ31K
2 304 000 pixels (1 920 x 1 200 dots)
PT-RS30K
1 470 000 pixels (1 400 x 1 050 dots)
Lens
Optional
Light source
Laser x 2
Light output
When [OPERATING MODE] is set
to [HIGH]
30 000 lm
*1 *3
, 31 000 lm (center)
*2 *3
When [OPERATING MODE] is set
to [NORMAL]
25 000 lm
*1 *3
, 26 000 lm (center)
*2 *3
Contrast ratio
*1
20 000:1 (when [DYNAMIC CONTRAST] is set to [3])
Color system
7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60)
Projected image size
1.78 m (70") to 25.40 m (1 000")
*4
Image aspect ratio
PT-RZ31K
16:10
PT-RS30K
4:3
Projection method
[FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR]
Power cord length
3.0 m (118-1/8")
Outer case
Fabricated metal and molded plastic
Dimensions
Width
700 mm (27-9/16")
Height
418 mm (16-15/32") (with the feet at shortest position)
373 mm (14-11/16") (excluding the feet)
370 mm (14-9/16") (excluding the feet and protrusion)
373 mm (14-11/16") (excluding the feet)
370 mm (14-9/16") (excluding the feet and protrusion)
Depth
1 070 mm (42-1/8") (excluding the protrusion)
Weight
Approx. 79.0 k] (174.2 lbs.)
*5
Noise level
*1
49 dB
Operating
environment
environment
Operating
environment
temperature
environment
temperature
0 °C (32 °F) to 50 °C (122 °F)
*6*7
Operating
environment
humidity
environment
humidity
10 % to 80 % (no condensation)
Remote
control
control
Power supply
DC 3 V (AA/R6/LR6 battery x 2)
Operating range
Within approx. 30 m (98'5") (when operated directly in front of signal receiver)
Weight
150 ]
(5.3 ozs.) (including batteries)
Dimensions
Width: 47.5 mm (1-7/8"), Height: 181.5 mm (7-5/32"), Depth: 27.5 mm (1-3/32")
*1
Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2012 international standards.
*2
The value of the light output at the center region of the projected image is extracted based on the light output measurement method defined by the
ISO/IEC 21118:2012 international standards.
*3
When a projection lens other than ET-D75LE95 is used with the power supply voltage of AC 200 V.
*4
When the Zoom Lens (Model No.: ET-D75LE8) is used, the projected image size for the maximum projection distance will be 1.78 m (70") to
15.24 m (600"). When the Fixed-focus Lens (Model No.: ET-D75LE95) is used, the projected image size for the maximum projection distance will be
3.05 m (120") to 15.24 m (600").
*5 Average value. Weight varies for each product.
*6
*6
The operating environment temperature should be between 0 °C (32 °F) and 45 °C (113 °F) if the projector is used at an altitude between 1 400 m
(4 593') and 4 200 m (13 780') above sea level. When the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] is
set to [LONG LIFE1], [LONG LIFE2], or [LONG LIFE3], the operating environment temperature should be between 0 °C (32 °F) and 45 °C (113 °F).
When the Smoke Cut Filter is used, the operating environment temperature should be between 0 °C (32 °F) and 40 °C (104 °F).
When the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] is set to [LONG LIFE1], [LONG LIFE2], or [LONG
LIFE3], the projector cannot be used at an altitude of 2 700 m (8 858') or higher above sea level. When the Smoke Cut Filter is used, the projector
cannot be used at an altitude of 1 400 m (4 593') or higher above sea level.
*7
When the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [OPERATING MODE] is set to [HIGH] or [NORMAL], and the operating
environment temperature exceeds the following value, the light output may be reduced to protect the projector.
f
When using the projector at an altitude lower than 2 700 m (8 858') above sea level: 35 °C (95 °F)
Click on the first or last page to see other PT-RZ31K / PT-RS30K service manuals if exist.