PT-RZ31K, PT-RS30K (serv.man2) - Panasonic Projector Service Manual (repair manual). Page 113

Read Panasonic PT-RZ31K / PT-RS30K (serv.man2) Service Manual online

ADJ-7
SECTION 3 ADJUSTMENTS
<RZ31K/RS30K>
1. 3. EEPROM data transfer
1. 3. 1. Equipment to be used
1. Computer : Use it for the transfer of backup data.
2. Communication cable : 
Serial terminal connection D-sub 9pin (male/female RS-232C straight)
LAN terminal connection LAN cable (When connecting directly, use a cross cable)
 
3. Service Software : [DataLogBackup.exe] Download from the projector service Web (PASS).
1. 3. 2. Connection Preparations
1. Check the settings of the projector
Serial terminal connection
1) The [INPUT SELECT] of sub menu [RS-232C] must be set according to the connection method.
2) Check the RS-232C settings (ID, Baudrate and Parity) and take a note.
    
LAN terminal connection
1) The [DIGITAL LINK MODE] of sub menu [NETWORK], please select to [AUTO] or [ETHERNET].
2) Check the network IP address of the projector and take a note.
3) Set the IP address of computer to approximate value of projector IP address.
[Note] • If you have changed the each menu settings, please return settings of the original (customers) after work.
2. Connect the projector and the PC by using a communication cable.
Serial terminal connection
Computer
Projector
Serial cable (RS-232C)
SERIAL IN
LAN terminal connection
Computer
Projector
LAN cable (straight)
LAN cable (straight)
LAN
1. 3. 3. Backup the EEPROM data (It is before circuit board exchange)
1. Switch the projector to "Normal-Standby" mode (STANDBY/ON indicator is lighting in red).
2. Service software to run with a computer.
Page of 127
Display

Click on the first or last page to see other PT-RZ31K / PT-RS30K (serv.man2) service manuals if exist.