Read Panasonic PT-RZ21KE / PT-RS20K Service Manual online
8
PREFACE
< RZ21K / RS20K >
2. 2 Terminal
<RGB 1 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p‑p] 75 Ω (SYNC ON GREEN: 1.0 V [p‑p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p‑p] 75 Ω
Y/C signal
Y: 1.0 V [p‑p], C: 0.286 V [p‑p] 75 Ω
VIDEO signal
1.0 V [p‑p] 75 Ω
<RGB 2 IN> terminal
1 set, high‑density D‑Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p‑p] 75 Ω (SYNC ON GREEN: 1.0 V [p‑p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p‑p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 p, HDCP compatible, Deep Color compatible
<SDI IN 1> terminal
1 set (BNC)
Single link SD-SDI
Single link SD-SDI
signal
SMPTE ST 259 compliant
Single link HD-SDI
signal
SMPTE ST 292 compliant
Single link 3G-SDI
signal
SMPTE ST 424, 425-2 compliant
Dual link HD-SDI
signal (Link A signal)
SMPTE ST 372 compliant
Dual link 3G-SDI signal
(Link 1 signal)
SMPTE ST 425-3 compliant
<SDI IN 2> terminal
1 set (BNC)
Single link SD-SDI
Single link SD-SDI
signal
SMPTE ST 259 compliant
Single link HD-SDI
signal
SMPTE ST 292 compliant
Single link 3G-SDI
signal
SMPTE ST 424, 425-2 compliant
Dual link HD-SDI
signal (Link B signal)
SMPTE ST 372 compliant
Dual link 3G-SDI signal
(Link 2 signal)
SMPTE ST 425-3 compliant
<MULTI PROJECTOR SYNC
IN> terminal/<3D SYNC 1 IN/
OUT> terminal (dual purpose)
1 set (BNC)
TTL high impedance
When [3D SYNC MODE] is set to output, TTL output: Maximum 10 mA
TTL high impedance
When [3D SYNC MODE] is set to output, TTL output: Maximum 10 mA
<MULTI PROJECTOR SYNC
OUT> terminal/<3D SYNC 2
OUT> terminal (dual purpose)
1 set (BNC)
TTL output: Maximum 10 mA
<SERIAL IN>/ <SERIAL OUT>
terminal
D-Sub 9 p, 1 set each, RS-232C compliant, for computer control
<REMOTE 1 IN>/ <REMOTE 1
OUT> terminal
M3 stereo mini jack, 1 set each, for remote control (wired)/for projector connection control
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for contact control
<DIGITAL LINK/LAN> terminal 1 set, RJ‑45, for network and DIGITAL LINK connections (HDBaseT
TM
compliant), PJLink compatible,
100Base-TX, Art-Net compatible, HDCP compatible, Deep Color compatible
<DC OUT 1> terminal/<DC
OUT 2> terminal
2 sets, USB connector (type A), for power supply only (DC 5 V, 2 A total for two sets)
Click on the first or last page to see other PT-RZ21KE / PT-RS20K service manuals if exist.