Read Panasonic PT-RQ22KEJ (serv.man3) Service Manual online
9
PREFACE
< RQ22K >
2. 3 Compatible signal
• For details of the types of video signals that can be used with the projector, refer to operating Instructions “List of compatible signals”
SDI signal input
SD-SDI signal
HD-SDI signal
3G-SDI signal
6G-SDI signal
SD-SDI signal
HD-SDI signal
3G-SDI signal
6G-SDI signal
*1
12G-SDI signal
*1
DIGITAL LINK signal input
f
Moving image signal resolution: 480/60i
*2
, 576/50i
*2
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 297 MHz
HDMI signal input
*3
f
Moving image signal resolution: 480/60i
*2
, 576/50i
*2
to 4 096 x 2 160
Still image signal resolution: 640 x 400 to 3 840 x 2 400 (non-interlace)
f
Dot clock frequency: 25 MHz to 594 MHz
DVI-D signal input
*4
f
Moving image signal resolution: 480/60i
*2
, 576/50i
*2
to 2 048 x 1 080
Still image signal resolution: 640 x 400 to 1 920 x 1 200 (non-interlace)
f
Dot clock frequency: 25 MHz to 162 MHz
*1 This is supported when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed in the slot.
*2 Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
*3 This is supported when the optional Interface Board for HDMI 2 input (Model No.: ET-MDNHM10) is installed in the slot.
*4 This is supported when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in the slot.
Note
f
When performing the simultaneous input of the 4K image (resolution of 3 840 x 2 160 or 4 096 x 2 160) using the Interface Board for HDMI
2 input (Model No.: ET-MDNHM10), it is necessary for the firmware version of the Interface Board for HDMI 2 input to be 2.00 or later. If the
version is earlier than 2.00, the simultaneous process is not performed even if corresponding signal is input. Consult your dealer regarding
the version update to the latest firmware.
For details on how to confirm the firmware version, refer to “How to confirm the firmware version of the Interface Board (optional)”
f
To use the 3G-SDI Terminal Board with Audio (Model No.: TY-TBN03G), it is necessary for the firmware version of the 3G-SDI Terminal
Board with Audio to be 2.00 or later. Consult your dealer regarding the version update to the latest firmware if the version is earlier than
2.00.
For details on how to confirm the firmware version, refer to “How to confirm the firmware version of the Interface Board (optional)”
Click on the first or last page to see other PT-RQ22KEJ (serv.man3) service manuals if exist.