PT-RQ13K - Panasonic Projector Service Manual (repair manual). Page 4

4

r

r

Using the projector in a location that the altitude is too high or the ambient temperature is too high may reduce the 

life of the components or result in malfunctions.
The upper limit of the operating environment temperature differs depending on the altitude or the [OPERATING 

MODE] setting in the [PROJECTOR SETUP] menu → [OPERATION SETTING]   

 

Altitude of 0 m (0') or higher 

to lower than 1 400 m 

(4 593')

0 °C (32 °F) to 45 °C (113 °F)

0 °C (32 °F) to 40 °C (104 °F)

Altitude of 1 400 m (4 593') 

or higher to lower than 

2 700 m (8 858')

0 °C (32 °F) to 40 °C (104 °F)

Altitude of 2 700 m (8 858') 

or higher to lower than 

4 200 m (13 780')

The projector cannot be used.

When the Smoke Cut Filter is used, the operating environment temperature should be between 0 °C (32 °F) and 

35 °C (95 °F) regardless of the [OPERATING MODE] setting. It cannot be used at an altitude of 1 400 m (4 593') 

or higher above sea level.

r

360°

360°

360°

360° vertically

360° horizontally

360° tilted

(combination of vertical and horizontal)

r

 

f

purposes may damage the projector.

 

f

The adjustable feet can be removed if not needed in the installation. However, do not use the screw holes 

holes of the adjustable feet. Failure to do so may cause damage to the projector.

r

If there is any facility or equipment which outputs strong radio waves near the installation location, install the 

, wrap the LAN cable connected to the 

<DIGITAL LINK/LAN> terminal using a piece of metal foil or a metal pipe which is grounded at both ends.

r

The high clarity projection lens is thermally affected by the light from the light source, making the focus unstable in 

the period just after switching on the power. It is recommended that images be projected continuously for at least 

30 minutes before the focus is adjusted.