Read Panasonic PT-RCQ10 / PT-RCQ80 (serv.man3) Service Manual online
ADJ-18
SECTION 3 ADJUSTMENTS
< RCQ10 / RCQ80 >
10. The success message is displayed after finishing the updating. Click the [OK] button.
11. Click the [EXIT] button to quit the service tool.
• After completing the updating, turn off the main power, turn on the power again, and check that the version
of firmware is updated definitely.
• Enter service mode, and check the version of each firmware on the sub menu [STATUS] screen of [PRO
JECTOR SETUP] menu.
• During updating, the indicator of the projector will be lighting or blinking as table below.
ON / STANDBY
LIGHT1 / LIGHT2
TEMP
Main
Lit in red
Blink in red alternately
OFF
Sub
Lit in red
Formatter
Lid in green
DIGITAL LINK
Lit in red
LD Driver
Lid in green
SLOT1
Lid in green
Click on the first or last page to see other PT-RCQ10 / PT-RCQ80 (serv.man3) service manuals if exist.