Read Panasonic PT-MZ770 / PT-MW730 (serv.man3) Service Manual online
4
PREFACE
<MZ770/MW730>
r
Projection in all 360° direction is possible.
360°
360°
360°
360° vertically
360° horizontally
360° tilted
(combination of vertical and horizontal)
r
Cautions when setting up the projector
f
Use the adjustable feet only for the floor standing installation and for adjusting the angle. Using them for other purposes
may damage the projector.
f
Do not stack projectors on top of each other.
f
Do not use the projector supporting it by the top.
f
Do not block the ventilation ports (intake and exhaust) of the projector.
f
Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and exhaust) of the
projector.
r
Focus adjustment
f
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after
switching on the power. It is recommended that the images are projected continuously for at least 30 minutes before the
focus is adjusted.
r
Do not install the projector at an altitude of 2 700 m (8 858') or higher above sea level.
r
Do not use the projector in a location that the ambient temperature exceeds 45 °C (113 °F).
f
Using the projector in a location that the altitude is too high or the ambient temperature is too high may reduce the life of the
components or result in malfunctions.
Click on the first or last page to see other PT-MZ770 / PT-MW730 (serv.man3) service manuals if exist.