Read Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual online
ADJ-2
SECTION 3 ADJUSTMENTS
<MZ16K/MZ13K/MZ10K>
1. Adjustment Items and Procedures
When the following parts are disassembled or replaced, please adjust the items according to the table below.
l
Need to adjust
m
Need to check
Adjustment Item
Replaced Component
Remarks
Polar-
izer
Optical
block
A-PCB
Others
1.1. Polarizer adjustment
l
l
1.2. Lens calibration
l
Lens
mounter
Stepping
motors
Take this adjustment if the projection lens is
moved manually or shutdown while the lens mo-
tor is operating.
Not necessary if "1.4. Adjusted data transfer" is
taken.
1.3 Electric convergence adjust-
ment
m
m
1.4. Adjusted data transfer
l
Transfer the data from old A-PCB to new one. If
the original data cannot be exported or the opti-
cal block is replaced, get the standard gamma/
uniformity data from service web site.
1.5. Panel type setting
l
l
Not necessary if "1.4. Adjusted data transfer" is
taken.
1.6. Flicker adjustment
l
l
1.7. Model setting
l
Not necessary if "1.4. Adjusted data transfer" is
taken.
1.8. Panel ghost feedback cali-
bration
l
l
Not necessary if "1.4. Adjustment data transfer"
is taken.
1.9 Clog sensor calibration
l
1.10. LD unit runtime reset
LD unit
1.11. Date and time set up
l
Setup after taking item "1.4. Adjustment data
transfer".
Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.