PT-MZ16K, PT-MZ13K, PT-MZ10K (serv.man2) - Panasonic Projector Service Manual (repair manual). Page 15

Read Panasonic PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) Service Manual online

INF-5
SECTION 1 SERVICE INFORMATION
<MZ16K/MZ13K/MZ10K>
Chapter 1Preparation — About your projector
30 - ENGLISH
18  NFC touch point
This is the touch point when using the near field communication 
(NFC, Near Field Communication) function. A device such as a 
smartphone equipped with the NFC function can be connected 
to the projector by holding it near the touch point.
19  Burglar hook port
Attaches a burglar prevention cable, etc.
Attention
 
f
Do not block the ventilation ports (intake and exhaust) of the projector.
The components may deteriorate faster if cooling inside the projector is inhibited.
Note
 
f
The optional NFC Upgrade Kit (Model No.: ET-NUK10) can be used to enable the NFC function of the projector. Note that there are some 
models that have the NFC function enabled from the time of factory shipment, and there are some countries or regions where the NFC 
Upgrade Kit cannot be applied.
For the availability of the NFC function in the country or region where you purchased the product, visit the Panasonic website (https://
panasonic.net/cns/projector/) or consult your dealer.
 
f
For the connection using the NFC function, use the application software “Smart Projector Control” which performs the setting and 
adjustment of the projector. For details on the “Smart Projector Control”, visit the Panasonic website (https://panasonic.net/cns/projector/).
 
r
Control panel
7
9
6
5
8
2
10
1
3
4
1  Power on <b> button
Sets the projector to projection mode when the <MAIN 
POWER> switch on the projector is set to <ON> and the power 
is turned off (standby mode).
2  Power standby <v> button
Sets the projector to the state where the projector is turned 
off (standby mode) when the <MAIN POWER> switch on the 
projector is set to <ON> and in projection mode.
3  <MENU> button
Displays or hides the main menu. 
Returns to the previous menu when a sub-menu is displayed. 
If you press the <MENU> button on the control panel for at least 
three seconds while the on-screen display is off (hidden), the 
on-screen display is turned on.
4  <SHUTTER> button
Used to temporarily turn off the image. 
5  Information monitor
      Displays various statuses and error information.
6  <INFO> button
      Used to operate the information monitor. 
7  <INPUT SELECT> button
Switches the input signal to project. 
8  <ENTER> button
Determines and executes an item in the menu screen.
9  asqw selection buttons
Used to select an item in the menu screen, change the setting, 
and adjust the level.
Also used to enter a password in [SECURITY] or enter 
characters.
10  <LENS> button
Adjusts the focus, zoom, and lens shift.
1.3. Control panel
Page of 116
Display

Click on the first or last page to see other PT-MZ16K / PT-MZ13K / PT-MZ10K (serv.man2) service manuals if exist.