Read Panasonic PT-LX270U / PT-LX270E / PT-LX270EA / PT-LX300U / PT-LX300E / PT-LX300EA (serv.man3) Service Manual online
PT-LX270 / PT-LX300 series
5-4
5-1-3 Firmware Upgrade
Procedure
1.
Set-up
- Hold on "Power" button and plug in the
power cord.
- Until Power ,Temp,Lamp LED will light red ,
Loosen “Power” button.
Loosen “Power” button.
- Connect projector with RS232 cable to PC.
2. Execute the "DLP Composer
TM
Lite 11.1"
file.
3. Setting "11.1FlashDeviceParameters".
- Select the file "11.1FlashDeviceParameters".
- Put "FlashDeviceParameters" file into the
folder where you setup "DLP Composer Lite
11.1".
- Put "FlashDeviceParameters" file into the
folder where you setup "DLP Composer Lite
11.1".
4. Click "Edit" and "Perferences".
Click on the first or last page to see other PT-LX270U / PT-LX270E / PT-LX270EA / PT-LX300U / PT-LX300E / PT-LX300EA (serv.man3) service manuals if exist.