PT-LW375, PT-LW335, PT-LB425, PT-LB385, PT-LB355, PT-LB305 (serv.man3) - Panasonic Projector Service Manual (repair manual). Page 25

Read Panasonic PT-LW375 / PT-LW335 / PT-LB425 / PT-LB385 / PT-LB355 / PT-LB305 (serv.man3) Service Manual online

INF-15
SECTION 1 SERVICE INFORMATION
<LW375/LW335/LB425/LB385/LB355/LB305>
Note
 
f
If the warning indicator <WARNING> persists to light or blink after taking these measurements such as turn off the projector, 
unplug the power cord, please repair it.
 
f
If the power indicator <ON(G)/STANDBY(R)> persists to light or blink in orange after taking these measurements such as turn 
off the projector, unplug the power cord, please repair it. 
98 - ENGLISH
Power indica-
tor <ON(G)/
STANDBY(R)> 
Warning 
indicator
<WARNING> 
Status
Cause
Solution
Orange
Lighting
Off
The projector detects an 
abnormal condition and 
cannot be turned on. 
(Warning)
--
 
f
If the projector is turned 
off, unplug the AC power 
cord and repair it. 
Lighting
Lighting
There is a problem in the 
contrast shutter circuit for iris. 
(Warning)
--
 
f
Turn off the projector,  
unplug the AC power 
cord and repair it. 
Blinking
Blinking
The lamp or the power 
supply for the lamp detects 
an abnormal condition, the 
projector cannot be turned 
on. (Warning)
 
f
Have you turned on the 
power again immediately 
after turning it off?
 
f
Wait a while until the 
luminous lamp cools 
off, and then turn on the 
power.
 
f
There is a problem in 
the lamp circuit. Have 
the source voltage been 
changed? (Drop)  
 
f
Turn off the projector, 
and unplug the AC power 
cord, and repair it.
Blinking
Off
Internal temperature is high. 
(Warning)
When the internal 
temperature rises further 
 
*1
 
is displayed 
on the screen, after a while 
the projector can be turned 
off automatically.
 
f
Is the air intake/exhaust 
port blocked?
 
f
Is the room temperature 
high?
 
f
clogged?
 
f
Remove any objects 
that are blocking the air 
intake/ exhaust port.
 
f
Install the projector in a 
location with an ambient 
temperature of 5 °C (41 
°F) to 40 °C (104 °F).
 
f
Do not use the projector 
at high altitudes of  
2 700 m (8 858') or 
higher above sea level.
 
f
replace it. 
*1 
 is displayed due 
down.
and
repair it.
Page of 70
Display

Click on the first or last page to see other PT-LW375 / PT-LW335 / PT-LB425 / PT-LB385 / PT-LB355 / PT-LB305 (serv.man3) service manuals if exist.