Read Panasonic PT-LW373 / PT-LW333 / PT-LB423 / PT-LB383 / PT-LB353 / PT-LB303 (serv.man3) Service Manual online
INF-13
SECTION 1 SERVICE INFORMATION
<LW373/LW333/LB423/LB383/LB353/LB303>
Function
Eco
Normal
Serial command control
*1
Network Function
--
Monitor Out
--
Audio Out
--
--
Auto Power On
3. 4. Standby mode
This projector provides two types of standby mode, Eco standby and Normal standby. In the Eco and Normal mode, the follow-
ing functions are restricted. To change the standby mode, use the projector's menu "Setting".
Normal .............. Supply the power to the projector even after turning off the projector.
Eco ................... Select "Eco" when you do not use the projector via network. The projector's network function will stop when
turning off the projector.
When Eco is selected, several functions will be restricted.
Restricted Function in the standby mode
*1 Effective only power-on command.
3. 5. How to change the baud rate of serial communication port
The baud rate of serial communication port of the projector can be changed following to the procedure below/
1. Turn the projector on and set into the service mode.
Press and hold the MENU button and button on the projector for more than 3 seconds or press and hold the MENU but-
ton on the remote control for more than 20 seconds. The service mode menu will appear on the screen.
2. Select Group "200", No. "1" and setup the Data value to "0" or "1".
0 : 19200bps (default)
1 : 9600bps
To select the adjusting items "Group", "No." or "Data" by pressing the MENU button repeatedly. The red cursor will move to
show the selected item. To change the value of selected item, press the or button repeatedly.
3. To exit the service mode, press the
button on the projector or remote control.
Service Mode PANASONIC
Input
Computer 1
Image Dynamic
Group
No.
Data
200
1
0
Ver.
1.00 XXXXX
Group No.
F/W version
Item No.
Data value
Click on the first or last page to see other PT-LW373 / PT-LW333 / PT-LB423 / PT-LB383 / PT-LB353 / PT-LB303 (serv.man3) service manuals if exist.