PT-LW330, PT-LW280, PT-LB360, PT-LB330, PT-LB300, PT-LB280 (serv.man2) - Panasonic Projector Service Manual (repair manual). Page 6

-6-

7 (NTSC, NTSC4.43, PAL, PAL-N, PAL-M, SECAM, PAL60)

0.76 m - 7.62 m (30" - 300")

16 : 10

4 : 3

[Front], [Rear], [Ceiling/Front], [Ceiling/Rear] (Menu setting system)

10 W (monaural) x 1

2 W (monaural) x 1

1 (High-density D-sub 15 pin female)

[RGB signal]      0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
                        HD/SYNC TTL high impedance, automatic positive/negative polarity 
                        compatible
                        VD TTL high impedance, automatic positive/negative polarity compatible
[YP

B

P

R

 signal]   Y: 1.0 V [p-p] including synchronization signal, P

B

P

R

: 0.7 V [p-p] 75 Ω

[Y/C signal]       Y: 1.0 V [p-p] C: 0.286 V [p-p] 75 Ω S1 signal compatible

1 (High-density D-sub 15 pin female) (Input /Output switching)

[RGB signal]      0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω)
                         HD/SYNC TTL high impedance, automatic positive/negative polarity 
                         compatible
                         VD TTL high impedance, automatic positive/negative polarity compatible

1 (Pin jack 1.0 V [p-p] 75 Ω)

1 (HDMI 19 pin, HDCP and Deep color compatible)
Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)

1 (M3 stereo mini jack, 0.5 V [rms], Input 

impedance 22 kΩ and more)

1 (Pin jack x 2 (L-R), 0.5 V [rms],  Input

 impedance 22 kΩ and more)

1 (M3 stereo mini jack, stereo monitor output compatible,

   0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)

USB connector (type A x 1, output DC 5V, 500mA maximum)

USB connector (type B x 1)

1 (D-Sub 9 pin, RS-232C compliant, for computer control use)

1 (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)

1.8 m (70-7/8")

Molded plastic

Width: 335 mm (13-3/16")
Height: 96 mm (3-25/32") (when adjustable foot shortened)
Depth: 252 mm (9-29/32")

Approx.2.8 kg (6.17 lbs.) 

When set to [     (Normal)] in [Lamp control] : 37 dB
When set to [     (Eco 1)] in [Lamp control] : 33 dB
When set to [     (Eco 2)] in [Lamp control] : 28 dB

5 °C (41 °F) to 40 °C (104 °F) (Elevation: below 1 400 m (4 593'); [High land]: [Off])

5 °C (41 °F) to 35 °C (95 °F) (Elevation: 1 400 m (4 593') ~ 2 700 m (8 858'); [High 
land]: [On])

20%-80% (no condensation)

DC 3 V (AAA/R03/LR03 battery x 2)

Approx. 5 m (16'4-13/16") (when operated directly in front of receptor)

63 g (2.22 ozs.) (including batteries)

Width: 44 mm (1-23/32"), Length: 105 mm (4-1/8"), Height: 20.5 mm (13/16")

*3  The <MONITOR OUT> terminal is only for PT-LB300 and PT-LB280.
*4  This terminal is only for PT-LW330, PT-LW280, PT-LB360 and PT-LB330.
*5  The <USB> terminal is only for PT-LB300 and PT-LB280.
*6  This is an average value. It may differ depending on individual product.
*7  Measurement, measuring conditions and method of notation all comply with ISO21118 international standards.
*8  [Lamp control] will be switched to [    (Eco 1)] automatically when the operating environment temperature is 35 °C to 40 °C.

● The part numbers of accessories and separately sold components are subject to change without notice.