PT-LB80NTU, PT-LB80NTE, PT-LB80NTEA, PT-LB80U, PT-LB80E, PT-LB80EA, PT-LB75NTU, PT-LB75NTE, PT-LB75NTEA, PT-LB75U, PT-LB75E, PT-LB75EA - Panasonic Projector Service Manual (repair manual). Page 19

Read Panasonic PT-LB80NTU / PT-LB80NTE / PT-LB80NTEA / PT-LB80U / PT-LB80E / PT-LB80EA / PT-LB75NTU / PT-LB75NTE / PT-LB75NTEA / PT-LB75U / PT-LB75E / PT-LB75EA Service Manual online

be
used
for
resetting
the
incidence
polarizer
position.
 3. Unscrew the 1 screw and remove the incidence polarizer
(G).
 4. Attach a new incidence polarizer (G) and align it with the
mark.
 5. Tighten the 1 screw with care not to move the incidence
polarizer position.
7.15. Replacement of Incidence
Polarizer (R and B)
 1. Remove the A-P.C.Board block according to the steps 1
through 5 in the section 7.3. "Removal of A-P.C.Board".
 2. Unscrew the 2 screws and remove the LCD block.
Note:
     ·    
Be careful not to touch the surface of prism and LCD
panel.
 3. Unscrew the 3 screws and remove the analysis case
(upper) .
Note:
     ·    
The incidence polarizer (G) is installed in the
analysis case (upper). Handle with care not to apply
external force to the incidence polarizer (G).
 4. Replace the incidence polarizer.
Note:
     ·    
Do not touch the incidence polarizer directly by the
hand.
Must use a fingerstall or clean gloves.
7.16. Replacement of Projection
Polarizer
     ·    
The procedure is described as an example of projection
polarizer (B).
 1. Remove the LCD block according to the section 7.12.
"Removal of LCD Block".
Note:
     ·    
Be careful not to touch the surface of prism and LCD
panel.
 2. Remove the projection polarizer which requires replacing.
(The projection polarizer is secured with adhesive tape.)
Notes:
     ·    
Be careful not to damage peripheral components
(prism, LCD panel, etc.).
     ·    
Use tweezers.
 3. Install new projection polarizer.
 a. Put adhesive tape on the projection polarizer.
 b. Stick the projection polarizer on the specified position.
Notes:
     ·    
Align the projection polarizer with the guides
(lower, side) of LCD block.
     ·    
Be careful not to touch the surface of projection
polarizer.
     ·    
Use tweezers.
19
PT-LB80NTU / PT-LB80NTE / PT-LB80NTEA / PT-LB80U / PT-LB80E / PT-LB80EA / PT-LB75NTU / PT-LB75NTE / PT-LB75NTEA / PT-LB75U / PT-LB75E / PT-LB75EA
Page of 118
Display

Click on the first or last page to see other PT-LB80NTU / PT-LB80NTE / PT-LB80NTEA / PT-LB80U / PT-LB80E / PT-LB80EA / PT-LB75NTU / PT-LB75NTE / PT-LB75NTEA / PT-LB75U / PT-LB75E / PT-LB75EA service manuals if exist.