PT-LB60NTU, PT-LB60NTE, PT-LB60NTEA, PT-LB60U, PT-LB60EA, PT-LB55NTE, PT-LB55NTEA, PT-LB55EA - Panasonic Projector Service Manual (repair manual). Page 16

Read Panasonic PT-LB60NTU / PT-LB60NTE / PT-LB60NTEA / PT-LB60U / PT-LB60EA / PT-LB55NTE / PT-LB55NTEA / PT-LB55EA Service Manual online

7.2. Removal of Upper Case
 1. Turn the projector upside down.
 2. Unscrew the 6 screws.
 3. Return the projector to the normal position.
 4. Lift the upper case upward (approx. 10 cm).
 5. Disconnect the cable from S1-P.C.Board (connector A8 on
A-P.C.Board) and remove the upper case.
7.3. Removal of A-P.C.Board
 1. Remove the upper case according to the section 7.2.
"Removal of Upper Case".
 2. Unscrew the 1 screw on the backside and remove the
connector cover.
 3. Unscrew the 1 screw fixing the connector metal fittings on
the backside.
 4. Unscrew the 4 screws and remove the lamp shield.
 5. Disconnect the connectors from/to the A-P.C.Board block
with the S2- and G-P.C.Boards.
 6. Unscrew the 2 screws and remove the A-P.C.Board block.
 7. Disconnect the flexible cable from connector A20 on A-
P.C.Board.
 8. Unscrew the 9 screws and remove the connector metal
fittings.
Notes:
     ·    
Because the S2-P.C.Board block is attached, work
carefully when removing the connector metal fittings.
     ·    
G-P.C.Board is attached to the connector metal
fittings. Be careful with handling.
 9. While disconnecting the connector between A- and S2-
P.C.Boards, remove the S2-P.C.Board block.
16
PT-LB60NTU / PT-LB60NTE / PT-LB60NTEA / PT-LB60U / PT-LB60EA / PT-LB55NTE / PT-LB55NTEA / PT-LB55EA
Page of 81
Display

Click on the first or last page to see other PT-LB60NTU / PT-LB60NTE / PT-LB60NTEA / PT-LB60U / PT-LB60EA / PT-LB55NTE / PT-LB55NTEA / PT-LB55EA service manuals if exist.