Read Panasonic PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) Service Manual online
5
PREFACE
< JX200F >
Chapter 1 Preparation — Precautions for use
ENGLISH - 19
f
Prevent hot and cool air from the air conditioning system to blow directly to the ventilation ports (intake and
exhaust) of the projector.
Power supply unit
Power supply unit
Power supply
unit
Power
supply unit
Power
supply unit
Power supply
unit
Air exhaust
port
Air exhaust
port
Air exhaust port
Air exhaust port
Air exhaust
port
Air exhaust
port
Main unit
Main unit
Main unit
Main unit
Main unit
Main unit
Air intake port
Air exhaust port
Air exhaust
port
Air intake port
Air intake port
Air intake port
Air
intake
port
Air intake port
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
300 mm (11-13/16") or longer
200 mm (7-7/8") or longer
200 mm (7-7/8")
or longer
*1
200 mm (7-7/8")
or longer
200 mm (7-7/8")
or longer
200 mm (7-7/8")
or longer
200 mm (7-7/8")
or longer
90 mm (3-
17/32")
or longer
*1
90 mm (3-17/32")
or longer
*1
90 mm
(3-17/32")
or longer
*2
*1 Distance from the wall or ceiling surface which will block the whole air intake port
*2 Distance from the wall or floor surface which will block the whole air intake port
f
Do not install the projector in a confined space.
When installing the projector in a confined space, provide air conditioning or ventilation separately. Exhaust heat
When installing the projector in a confined space, provide air conditioning or ventilation separately. Exhaust heat
may accumulate when the ventilation is not enough, triggering the protection circuit of the projector.
Cautions when transporting
f
Before transporting, tighten the ball joint fixing screw and the ball joint stopper using the supplied Allen wrench
(opposite side size 3/16"). Transporting while they are loose may cause the fingers to be caught in between or
malfunction.
Chapter 1 Preparation — Precautions for use
18 - ENGLISH
r
Do not install the projector on a ceiling with the power supply unit tilted right or left.
Can be installed
Cannot be installed
Cannot be installed
Ceiling
Power
supply
unit
r
When installing the projector on a sloped ceiling, install in a direction that the pole
side of the power supply unit will be higher than the power <v/b> button side.
Can be installed
Cannot be installed
Ceiling
Power <v/b> button side
Power supply unit
Pole side
r
When using the optional Mount Bracket, do not install the projector on a floor.
Ceiling
Wall
Floor
Can be installed
Can be installed
Cannot be installed
r
When installing the projector to a wall using the optional Mount Bracket, set the pole
side higher than the power <v/b> button side and the power supply unit vertically.
Pole side set at the
higher side
Pole side set at the
lower side
Power supply unit set
horizontally
Can be installed
Cannot be installed
Cannot be installed
Cannot be installed
Power supply unit not
set vertically
Wall
Wall
Wall
r
When using the projector in combination with the optional Floor Stand Kit, install on a
horizontal surface.
r
When using the projector in combination with the optional Mount Bracket or Floor
Stand Kit, use the power cord supplied with the optional accessories, and ground at
the outlet side.
r
Focus adjustment
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period
just after switching on the power. It is recommended that images be projected continuously for at least 30 minutes
before the focus is adjusted.
r
Cautions when setting up the projector
f
Do not block the ventilation ports (intake and exhaust) of the projector.
Click on the first or last page to see other PT-JX200FBU / PT-JX200FWU / PT-JX200FBE / PT-JX200FWE / PT-JX200FBK / PT-JX200FWK (serv.man2) service manuals if exist.