PT-JW130GWE, PT-JW130GBE (serv.man2) - Panasonic Projector Service Manual (repair manual). Page 26

SECTION 1  SERVICE  INFORMATION

<PT-JW130>

1. Computer : Use to get the log data
2. Service Software : ［DataLogBackup.exe］ Please prepare the service software.
<When connecting via wired LAN>
3. Communication cable : LAN cable (Category 5 or higher)

1. Connect the projector and a computer using a LAN cable.
2. Open the [NETWORK] menu and confirm [WIRED LAN] settings.
3. Based on setting of the projector, configure the network of the computer.

・

Set the IP address of computer to the same IP address group of the projector.

・

If the projector is in the factory default settings, configure the network settings

of the computer side as follows, and then you can use network functions.

1. Open the [NETWORK] menu and confirm the [WIRELESS LAN] settings.
2. Based on setting of the projector, configure the network of the computer.

・

Set the IP address of computer to the same IP address group of the projector.

・

If [M-DIRECT] is set on the projector side, set “Obtain an IP address automatically”

in the network setting on the computer side.

・

If [USER1] through [USER3] are set on the projector side, follow the instructions 

of your network administrator and configure each network setting item of your 

computer and the projector.

3. Connect the computer to the network set for the projector.

・

Click            in the task tray (lower right of the computer screen).

If [M-DIRECT] is set on the projector, select the same name as SSID set for the projector.

・

If the projector is in the default settings and [M-DIRECT] is set, [SSID] is [M-DIRECTxxxx]

(xxxx stands for the last four-digit number of the network ID).

・

If [USER1] through [USER3] are set on the projector, select the same name as SSID of your access point.

1. Set the projector to "Normal-Standby" mode (POWER indicator is red blinking).
2. Start up service software [DataLogBackupSN.exe] with a computer.

[IP ADDRESS]

　

192.168.10.101

[SUBNET MASK]

　

255.255.255.0

[DEFAULT GATEWAY]

　

192.168.10.1

When connecting via wired LAN

Computer

Projector

LAN cable (straight)

LAN cable (straight)

Hub

<Connection Example>

When connecting via wireless LAN

<Connection Example>

IEEE802.11a/b/g/n

Computer

Projector

INF - 17