Read Panasonic PT-FZ570 / PT-FW530 / PT-FX500 Service Manual online
8
PREFACE
<FZ570/FW530/FX500>
Chapter 7
Appendix — Specifications
152 - ENGLISH
Note
f The model numbers of accessories and optional accessories are subject to change without prior notice.
r Terminal
<COMPUTER 1 IN> terminal
1 set high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
(The SYNC/HD and VD terminals do not support 3 value SYNC.)
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
<COMPUTER 2 IN /1 OUT>
terminal
terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
SYNC/HD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
VD
TTL high impedance, automatic positive/negative
polarity compatible
polarity compatible
(The SYNC/HD and VD terminals do not support 3 value SYNC.)
YP
B
P
R
signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<VIDEO IN> terminal
1 set, pin jack 1.0 V [p-p] 75 Ω
<HDMI 1 IN>/<HDMI 2 IN>
terminal
terminal
2 sets, HDMI 19 pin, HDCP compatible, Deep Color compatible
Audio signal
Audio signal
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<AUDIO IN 1>/<AUDIO IN 2>
terminal
terminal
2 sets, M3 stereo mini jack 0.5 V [rms], input impedance 22 kΩ or more
<AUDIO IN 3> terminal
1 set, pin jack x 2 (L-R) 0.5 V [rms], input impedance 22 kΩ or more
<VARIABLE AUDIO OUT>
terminal
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0 V [rms] to 2.0 V [rms] (variable), output impedance 2.2 kΩ or less
<SERIAL IN> terminal
1 set, D-Sub 9 p, RS-232C compliant, for computer control
<DIGITAL LINK/LAN> terminal
1 set, RJ-45, for network, DIGITAL LINK connection, PJLink compatible, 100Base-TX
<LAN> terminal
1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
<WIRELESS> terminal
USB connector (type A) x 1, for the Wireless module (Model No.: ET-WML100) only
<DC OUT> terminal
USB connector (type A) x 1, for power supply only (DC 5 V, maximum 900 mA)
r Applicable scanning frequency
Refer to “List of compatible signals” on the operating instructions for the types of video signals that can be used
with the projector.
with the projector.
For video signal
Horizontal : 15.73 kHz Vertical : 59.94 Hz, Horizontal : 15.63 kHz Vertical : 50 Hz
For Y/C signal
Horizontal : 15.73 kHz Vertical : 59.94 Hz, Horizontal : 15.63 kHz Vertical : 50 Hz
For RGB signal
f
Displayable resolution: 640 x 400 to 1 920 x 1 200
f
Dot clock frequency: 162 MHz or less
For YC
B
C
R
/YP
B
P
R
signal
f
Displayable resolution: 480i/576i to 1 920 x 1 080
f
Dot clock frequency: 148.5 MHz or less
For HDMI signal
f
Displayable resolution for movie-based signals: 480i/576i
*1
to 1 920 x 1 080
Displayable resolution for still image signals: 640 x 400 to 1 920 x 1 200 (non-interlaced)
f
Dot clock frequency: 25 MHz - 162 MHz
*1
Pixel-Repetition signal (dot clock frequency 27.0 MHz) only
Note
f
DIGITAL LINK input compatible signal is the same as HDMI input compatible signal.
Click on the first or last page to see other PT-FZ570 / PT-FW530 / PT-FX500 service manuals if exist.