Read Panasonic PT-FZ570 / PT-FW530 / PT-FX500 (serv.man4) Service Manual online
ADJ-12
SECTION 3 ADJUSTMENTS
<FZ570/FW530/FX500>
8. Click [OK] button to start updating if the firmware version is right.
9. During updating, the message "Now updating....." appears and all the LED are blinking. After finishing updating, the mes-
sage "Waiting for Projector reboot..." apperas and the projector sets into standby mode. (The LED stops blinking.)
10. When the software detects that the projector has rebooted, the conformation window will appear. Click the [OK] button to
close the window.
11 Click the [EXIT] button to quit the application
12. When updating for DIGITAL LINK, set the projector into standby mode and press and hold the [POWER]+ [INPUT]+
[DOWN] keys at the same time for more than 3 seconds. By pressing those buttons, the new firmware stored in the Flash
memory will be transferred to the EEPROM for Valens. During writing to its EEPROM, The LED on the projector will be
lighting sequentially for about 3 minutes.
* Turn the projector on and display the [EXTRA OPTION] menu. Confirm that the version of the firmware is updated correctly
on the [SELF CHECK] item.
* If the version of the firmware is the
same, its updating will be skipped.
Never disconnect the AC
cord during updating.
Click on the first or last page to see other PT-FZ570 / PT-FW530 / PT-FX500 (serv.man4) service manuals if exist.