Read Panasonic PT-FW100NTU / PT-FW100NTE / PT-FW100NTEA Service Manual online
7.2. Removal of Upper Case
1. Turn the projector upside down.
2. Unscrew the 8 screws.
3. Return the projector to the normal position.
4. Lift the upper case upward.
5. Disconnect the flexible cable between D-P.C.Board and R-
P.C.Board, then remove the upper case.
7.3. Removal of A-P.C.Board
1. Remove the upper case according to the section 7.2.
"Removal of Upper Case".
2. Unscrew the 2 screws and remove the connector cover.
Note:
·
When reassembling, confirm the interlock switch is
normal status (the switch is in "ON" position).
normal status (the switch is in "ON" position).
3. Disconnect all connectors of the cables connected with the
A-P.C.Board.
4. Unscrew the 3 screws and remove the A-P.C.Board block.
5. Unscrew the 2 screws and remove the connector dustproof
cover.
Note:
·
R-P.C.Board is attached on the connector metal
fittings. Be careful with handling.
fittings. Be careful with handling.
14
PT-FW100NTU / PT-FW100NTE / PT-FW100NTEA
Click on the first or last page to see other PT-FW100NTU / PT-FW100NTE / PT-FW100NTEA service manuals if exist.