Read Panasonic PT-EX12KU / PT-EX12KE Service Manual online
-20-
Maintenance
Attention
• Turn off the UV lamp before opening the lamp cover.
• When the projector is mounted on the ceiling, do not put your face near the lamp unit.
• Attach the lamp unit securely.
• If the lamp unit is not attached properly, remove it and then attach it again. Forcing the lamp unit in may break
• Turn off the UV lamp before opening the lamp cover.
• When the projector is mounted on the ceiling, do not put your face near the lamp unit.
• Attach the lamp unit securely.
• If the lamp unit is not attached properly, remove it and then attach it again. Forcing the lamp unit in may break
the connector.
• The glass surface may be hot. When replacing the lamp unit, be sure to hold it by the handle.
1) Check which lamp to replace with the lamp status displayed on the screen, or the lamp indicators
<LAMP 1 REPLACE> / <LAMP 2 REPLACE>.
2) Turn off the power and disconnect the power plug from the power outlet, and wait at least 60 minutes,
and then check if the lamp unit has cooled down.
3) Use a Phillips screwdriver to turn the lamp cover fixing screw until they turn freely, and then open the
lamp cover.
• Pull the lamp cover in the direction of arrow (i) and lift it up in the direction of arrow (ii) to open.
n
Replacing the lamp unit
(i)
(i)
(ii)
(i)
(i)
(ii)
Screw
Lamp cover
Click on the first or last page to see other PT-EX12KU / PT-EX12KE service manuals if exist.