PT-EW540, PT-EW540L, PT-EW540D, PT-EW540LD, PT-EX510, PT-EX510L, PT-EX510D, PT-EX510LD - Panasonic Projector Service Manual (repair manual). Page 7

Read Panasonic PT-EW540 / PT-EW540L / PT-EW540D / PT-EW540LD / PT-EX510 / PT-EX510L / PT-EX510D / PT-EX510LD Service Manual online

7
PREFACE
Chapter 6 Appendix — 
ENGLISH - 151
 
r
Terminal
<RGB 1 IN> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<RGB 2 IN> terminal
1 set (BNC x 5 (RGB/YP
B
P
R
/YC
B
C
R
/YC/VIDEO x 1))
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, automatic positive/negative 
polarity compatible
VD
TTL high impedance, automatic positive/negative 
polarity compatible
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
Y/C signal
Y: 1.0 V [p-p], C: 0.286 V [p-p] 75 Ω
Video signal
Y: 1.0 V [p-p] 75 Ω
<MONITOR OUT> terminal
1 set, high-density D-Sub 15 p (female)
RGB signal
0.7 V [p-p] 75 Ω (SYNC ON GREEN: 1.0 V [p-p] 75 Ω)
SYNC/HD
TTL high impedance, positive/negative polarity
VD
TTL high impedance, positive/negative polarity
YP
B
P
R
 signal
Y: 1.0 V [p-p] including synchronization signal, P
B
P
R
: 0.7 V [p-p] 75 Ω
<DVI-D IN> terminal
1 set, DVI-D 24 p, single link, DVI 1.0 compliant, HDCP compatible
<HDMI IN> terminal
1 set, HDMI 19 pin, HDCP compatible, Deep Color compatible
Audio signal
Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
<VIDEO IN> terminal
1 set, pin jack 1.0 V [p-p] 75 Ω
 
 
 
<AUDIO IN 1>/<AUDIO IN 2> 
terminals
1 set each, M3 stereo mini jack 0.5
 
V [rms], input impedance 22
 
kΩ or more
<AUDIO IN 3> terminal
1 set, pin jack x 2 (L-R) 0.5
 
V [rms], input impedance 22
 
kΩ or more
<VARIABLE AUDIO OUT> 
terminal
1 set, M3 stereo mini jack (monitor output, stereo compatible)
0
 
V [rms] to 2.0
 
V [rms] (variable), output impedance 2.2
 
kΩ or less
<SERIAL IN> terminal
D-Sub 9
 
p, 1 set, RS-232C compliant, for computer control
<REMOTE 1 IN> terminal
M3 stereo mini jack cable, 1 set, for remote control (wired)
<REMOTE 2 IN> terminal
1 set, D-Sub 9 p, for external control
Note
 
f
The model numbers of accessories and optional accessories are subject to change without prior notice.
<LAN> terminal 
1 set, RJ-45, for network connection, PJLink compatible, 10Base-T/100Base-TX
Page of 125
Display

Click on the first or last page to see other PT-EW540 / PT-EW540L / PT-EW540D / PT-EW540LD / PT-EX510 / PT-EX510L / PT-EX510D / PT-EX510LD service manuals if exist.