Read Panasonic PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2 (serv.man5) Service Manual online
SECTION 1 SERVICE INFORMATION
<DZ21K2/DS20K2/DW17K2/DZ16K2>
13. SMOKE FILTER DISPLAY
・ Setting of the warning display (self-diagnosis display "U75") at the time of smoked cut-off filter use.
- ON : Warning is displayed.
- OFF : Warning is not displayed.
14. LAMP DRIVE MODE
・ Setting of the lamp drive mode.
- RUNTIME PRIORITY : Ballast circuit controls that prioritizes the life of lamp. (default setting)
- BRIGHTNESS PRIORITY : Ballast circuit controls that prioritizes the brightness of lamp.
[ Note ]
・ Lamp that was used for more than 10 hours can not change the drive mode.
・ If the lamp is mixed, projector drive mode the same lamp lighted.
・ If the lamp is mixed, projector drive mode the same lamp lighted.
If all the lamps are not applicable, it will shut down. (Self-diagnosis display: U34)
・ If you use the different lamp of the projector drive mode setting, to indicate in the OSD warning and
LAMP indicator blinks 3 times.
3. 3. 2. Additional function of each menu
1. [PICTURE] menu
・ [AI WINDOW] is added to the setting of the sub menu [DYNAMIC IRIS].
- Sets the APL detection area. Please set AI MODE to "AUTO" usually.
2. [POSITION] menu
・ [DVI EQUALIZER] is added to sub menu.
- When noise contamination to DVI input caused by long cable or external device, set this item so that
the noise decreases. Usually, set to [AUTO].
3. [ADVANCED] menu
・ [FRC DEMO MODE] is added to sub menu.
- Setting of the frame creation demo mode.
DW17K2 is not supported.
INF - 12
Click on the first or last page to see other PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2 (serv.man5) service manuals if exist.