PT-DZ16KU, PT-DZ16KE, PT-DS16KD (serv.man3) - Panasonic Projector Other Service Manuals (repair manual). Page 9

Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man3) Other Service Manuals online

SECTION 3  ADJUSTMENTS
<PT-DZ16K>
2. Software Update procedure
* Update the software by connecting to a serial terminal or LAN terminal.
* The update of network software should connect the LAN terminal.
  2. 1. Update by the LAN terminal connection
    2. 1. 1. Equipment to be used
1. Computer : Use it for the transfer of software.
2. Communication cable : LAN cable. (When is connected directly; crossing cable)
3. Service Software : [MainSubNet Update Tool.exe] Service software is downloaded from the projector service homepage.
4. Microprocessor Software: Please download the file from the projector service homepage to the PC.
    2. 1. 2. Connection Preparations
[Note]
Set up your computer not to standby or shutdown.
    2. 1. 3. Update procedure
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software with a computer, select Model, and then click the [OK] button.
1.Confirm the network IP address of the projector
   and record it.
2. Set the IP address of the computer to the
    approximate value of the projector IP address.
3. Connect the LAN terminal of the projector to
    the PC with a LAN cable.
ADJ - 9
3. Select "LAN" in "Connection" and input the IP address of the projector, and click [Connection Check] button.
* If updating the Formatter, please enter your Username and Password.
  (The factory default setting of the user name is admin1 and the password is panasonic.)
ADJ - 9
Page of 14
Display

Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man3) service manuals if exist.