Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man12) Other Service Manuals online
SECTION 2 DISASSEMBLY PROCEDURES
<PT-DZ16K>
2. 5. Removal of Power supply block <PC1/PC2 -P.C.Board>
1. Remove the Upper Case according to the section 2.2 "Removal of Upper Case".
2. Remove the Signal processing block according to the steps 1 through 3 in the section
2.3 "Removal of Signal processing block".
3. Pull out the Ballast block according to the steps 1 through 2 in the section 2.4 "Removal of Ballast block".
Spread the insulator on top of the main unit, place the ballast blocks on top of it.
4. Unscrew the 3 screws and remove the Partition 1 and Partition 2.
Ballast block
Insulator
Partition 1
* The overlap is the power-block
side is a Partition 1.
DIS-10
5. Unscrew the 3 screws and remove the Power fan block.
XYN3+F8FJ
Partition 2
XYN3+F8FJ
Power fan block
Partition 1
Partition 2
* The overlap is the power-block
side is a Partition 1.
DIS-10
Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man12) service manuals if exist.