PT-DZ16KU, PT-DZ16KE, PT-DS16KD (serv.man11) - Panasonic Projector Other Service Manuals (repair manual). Page 4

Read Panasonic PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man11) Other Service Manuals online

SECTION 3  ADJUSTMENTS
<PT-DZ16K>
  1. 4. EEPROM data transfer
* The EEPROM data transfer via LAN terminal or serial terminal.
    1. 4. 1. Equipment to be used
1. Computer : Use it for the transfer of backup data.
2. Communication cable
・ Case of serial terminal connection : D-sub 9pin (male/female RS-232C straight)
・ Case of LAN terminal connection : LAN cable. (When connecting directly, use a cross cable)
3. Service Software : [DataLogBackup.exe] Service software is downloaded from the projector service homepage.
    1. 4. 2. Connection preparations
1. In the case of serial terminal connection
・ Confirm the RS-232C settings (ID, Baudrate  and Parity) and take a note.
2. In the case of LAN terminal connection
・ Confirm the network IP address of the projector and take a note.
・ Set the IP address of computer to approximate value of projector IP address.
3. Connect the projector and the PC by using a communication cable.
[Note]
Set up your computer not to standby or shutdown.
Serial terminal connection
LAN terminal connection
ADJ - 4
    1. 4. 3. Backup the EEPROM data (It is before circuit board exchange)
1. Switch the projector to "Normal-Standby" mode (POWER indicator is Lighting in red).
2. Start up service software [DataLogBackup.exe] with a computer.
3. 1) Select "Option " → " Setting".
    2) Select the connection method, enter the setting information of the projector.
ADJ - 4
Page of 14
Display

Click on the first or last page to see other PT-DZ16KU / PT-DZ16KE / PT-DS16KD (serv.man11) service manuals if exist.