Order No. TSD1406I028
There was a case that the top part of the cross-hatch pattern was missing for both external signal
and internal test signal when keystone distortion corrected.
1th July, 2014
The top part of the cross-hatch pattern was missing
when keystone distortion corrected
Please use this service information together with the Service Manual as follows :
Modification applied from
1. Set [GEOMETRY] menu from [KEYSTONE] to [OFF].
2. Set [GEOMETRY] menu to [KEYSTONE] again.
When this improvement is activated, screen position is shifted.
Please adjust keystone once again.
Main firmware has been updated.
Please download the firmware from the Projector service website.
Main firmware version : Ver 4.01
Main firmware version : Ver 1.03
This main firmware will be provided to end users via the website "PASS (Projector Asset Support
When KEYSTONE is already set to ON, please set the menu as follows and activate this