PT-DS100XE, PT-DS12KE, PT-DS20K2E, PT-DS20K2EJ, PT-DS20KE, PT-DW11KE, PT-DW17K2E, PT-DW17KE, PT-DW90XE, PT-DZ10KE, PT-DZ110XE, PT-DZ13KE, PT-DZ16K2E, PT-DZ16KE, PT-DZ21K2E, PT-DZ21KE, PT-RQ13KE, PT-RQ22KEJ, PT-RQ32KE, PT-RS11KE, PT-RS30KE, PT-RZ12KE, PT-RZ21KE, PT-RZ31KE - Panasonic Projector Other Service Manuals (repair manual). Page 6

Read Panasonic PT-DS100XE / PT-DS12KE / PT-DS20K2E / PT-DS20K2EJ / PT-DS20KE / PT-DW11KE / PT-DW17K2E / PT-DW17KE / PT-DW90XE / PT-DZ10KE / PT-DZ110XE / PT-DZ13KE / PT-DZ16K2E / PT-DZ16KE / PT-DZ21K2E / PT-DZ21KE / PT-RQ13KE / PT-RQ22KEJ / PT-RQ32KE / PT-RS11KE / PT-RS30KE / PT-RZ12KE / PT-RZ21KE / PT-RZ31KE Other Service Manuals online

DMD chip, FM-PCB and TIR prism Replacing Procedure
DMD chip, FM-PCB and TIR prism Replacing Procedure
6
[1] FM-PCB replacement 
Tools:
  • Phillips screw driver
1. 1. FM-PCB removal
DMD heatsink
B
A
C
Backer plate
Insulation sheet
DMD block
Thermistor*
* only for G-DMD
FM-PCB
Smooth sur-
face side comes 
to FM-PCB side.
Smaller dia side 
of spring comes 
to screw head 
side
[Note]:
•  The mounting method of the thermistor differs depending on 
the models. For further information, refer to each model's 
service manual.
E.g.: PT-RZ12K series
1.  Remove 4 screws/spring-A and take off the heatsink from the DMD unit.
2.  Remove 4 screws-B and take off the backer plate and FM-PCB from the 
DMD unit..
Page of 44
Display

Click on the first or last page to see other PT-DS100XE / PT-DS12KE / PT-DS20K2E / PT-DS20K2EJ / PT-DS20KE / PT-DW11KE / PT-DW17K2E / PT-DW17KE / PT-DW90XE / PT-DZ10KE / PT-DZ110XE / PT-DZ13KE / PT-DZ16K2E / PT-DZ16KE / PT-DZ21K2E / PT-DZ21KE / PT-RQ13KE / PT-RQ22KEJ / PT-RQ32KE / PT-RS11KE / PT-RS30KE / PT-RZ12KE / PT-RZ21KE / PT-RZ31KE service manuals if exist.