Read Panasonic PT-AE700U / PT-AE700E Service Manual online
Table Of Contents
COVER
1 Safety Precautions
1.1 General Guidelines
1.2 Leakage Current Check
1.3 UV Precaution and
UHM Lamp Precautions
2 Ext Option
2.1 Procedure to enter EXT
OPTION
2.2 EXT OPTION Menu and
Functions
2.3 Canceling EXT
OPTION
3 Self-Check Mode
3.1 Procedure to enter the
self-check mode
3.2 Self Check Display and
Contents
3.3 Canceling the self-check
mode
4 Service Mode
4.1 Procedure to enter the
service mode
4.2 Canceling the service
mode
5 Flicker Adjustment Mode
5.1 Procedure to enter the
adjustment mode
5.2 Adjustment Display and
Contents
5.3 Canceling the flicker
adjustment mode
6 Disassembly Instructions
6.1 Printed Circuit Board
and Main Parts Location
Service Manual
TOP
NEXT
ORDER NO. VED0409357C0
D10
LCD Projector
●
PT-AE700U
PT-AE700E
PT-AE700E
6.2 Removal of Upper Case
6.3 Removal of A-P.C.
Board
6.4 Removal of S-P.C.Board
6.5 Removal of J-P.C.Board
(PT-AE700E only)
6.6 Removal of B / Q-
Module
6.7 Removal of P-Module
6.8 Removal of K-P.C.
Board
6.9 Removal of Lamp Unit
6.10 Removal of Analysis
Block and Projection Lens
6.11 Removal of LCD Block
6.12 Removal of Projection
Lens
6.13 Replacement of LCD
Panel
6.14 LCD Panel
Discrimination
6.15 LCD Panel
Combination
6.16 Replacement of
Projection Polarizer
6.17 Replacement of
Incidence Polarizer (R and B)
6.18 Replacement of
Incidence Polarizer (G)
6.19 Replacement of PBS
Array (Analysis Block)
6.20 Removal of Iris Unit
7 Measurement and
Adjustments
7.1 Adjustment Procedure
Flowchart
7.2 Cautions for Adjustment
7.3 Setting Before
Adjustment
7.4 Convergence
Adjustment
7.4.1 Tools to be used
7.4.2 Preparation
7.4.3 Adjustment Procedure
7.5 Lighting Area
Adjustment
7.5.1 Tools to be used
7.5.2 Preparation
7.5.3 Adjustment Procedure
7.6 Software for Adjustment
7.6.1 Outline
7.6.2 Operating Procedure
7.6.3 Port Name and
Projector Selection Menu
7.6.4 Data Transmission
/ Reception Menu
7.6.5 Adjustment Menu
7.7 Flicker Adjustment
7.7.1 Adjustment Menu
7.7.2 Explanation of Buttons
7.7.3 Equipment to be used
7.7.4 Adjustment Procedure
7.8 Input Level Adjustment
(RGB)
7.8.1 Adjustment Menu
7.8.2 Explanation of Buttons
7.8.3 Equipment to be used
7.8.4 Adjustment Procedure
8 Troubleshooting
9 Interconnection Block
Diagram
9.1 Interconnection Block
Diagram (1 / 2)
9.2 Interconnection Block
Diagram (2 / 2)
10 Block Diagram
© 2004 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.
10.1 Power Supply
10.2 Signal Processing (1
/ 3)
10.3 Signal Processing (2
/ 3)
10.4 Signal Processing (3
/ 3)
11 Schematic Diagram
11.1 A-P.C.Board (1 /
6)
11.2 A-P.C.Board (2 /
6)
11.3 A-P.C.Board (3 /
6)
11.4 A-P.C.Board (4 /
6)
11.5 A-P.C.Board (5 /
6)
11.6 A-P.C.Board (6 /
6)
11.7 K-P.C.Board, S-P.C.
Board, H-P.C.Board, J-P.C.
Board
11.8 B-Module (1 / 2)
11.9 B-Module (2 / 2)
12 Circuit Boards
12.1 A-P.CBoard
12.2 J-P.C.Board / S-P.
C.Board
13 Terminal guide of ICs
and transistors
14 Exploded Views
15 Replacement Parts List
16 Schematic Diagram for
printing with A4 size
TOP
NEXT