Read Panasonic PT-AE1000U / PT-AE1000E Service Manual online
6 Disassembly Instructions
Warning:
·
Be sure to unplug the power cord from the power outlet before disassembling this projector.
Caution:
·
While turning over a printed circuit board, be sure to put a insulating material under it to prevent a short circuit.
·
Printed circuit boards and wires must not be pulled forcibly, but be handled carefully.
·
Connectors also must be handled carefully.
·
When reassembling, replace used adhesive tape with new one (Do not re-use used tape).
·
After repairing this projector, be sure to put back the wires and connectors to the original condition.
·
After disassembling or repairing this projector, do the following confirmation work for LCD panels damage prevention.
1. Disconnect 3 flexible cables of LCD Panels (R/G/B).
2. Turn ON the power and confirm the -6V detection LED (D1031) lights.
(If it does not light, check and repair the -6V circuit.)
3. Turn OFF the power and connect the 3 flexible cables of LCD Panels.
14
PT-AE1000U / PT-AE1000E
Click on the first or last page to see other PT-AE1000U / PT-AE1000E service manuals if exist.