ET-YFB200G - Panasonic Projector Service Manual (repair manual). Page 13

SERVICE MODE

< YFB200G >

This device has Service Mode in addition to standard on-screen menus (User Mode).
This mode enables some menu for the service operation.

1. EMULATE

・

Setting the control method of [DISPLAY DEVICE] button.

- OFF : Communicate with the display device via RS232C.
- ON : Communicate with the display device via Network (PJ Link).

* PJ Link noncompliant display device can not communicate even [ON].

2. PJ1 IP ADDRESS

・

When [EMULATE] setting is [ON], to register the IP address of the display device that is connected
to the [DISPLAY DEVICE 1].

3. PJ2 IP ADDRESS

・

When [EMULATE] setting is [ON], to register the IP address of the display device that is connected
to the [DISPLAY DEVICE 2].

4. THROUGH MODE

・

Setting the HDCP encryption or non-encryption of the <DIGITAL LINK 1/2 OUT> signal.

- OFF : Enable the HDCP encryption.
- ON : Disable the HDCP encryption.

* If the input signal is HDCP encrypted, The video out is not displayed and the icon is displayed.

1. Press the [POWER] button to turn on the power.
2. Press the [ENTER] button and the [MENU] button at the same time.
3. Next, press the [ENTER] button and the [ w ] button at the same time.
4. When "MENU" button is pressed at the service mode, return to the user mode

  Function specification varies according to a version of the main microcomputer software. 

Service menu [EXT OPTION] will be displayed. 

1. －
2. －
3. －
4. －
5. －
6. －
7. －

 EXT OPTION

 EMULATE

 OFF

 PJ1 IP ADDRESS

 192.168.0.8

 PJ2 IP ADDRESS

 192.168.0.9

 THROUGH MODE

 OFF

 SELF CHECK

 STATUS

 TEST PATTERN

13