ET-D75LE90 - Panasonic Projector Other Service Manuals (repair manual). Page 2

■Items of the backup input mode

Disables the backup function.

Enables the backup function between the DVI-D input and the HDMI input.

Enables the backup function between the SDI1 input and the SDI2 input.

<Switching mode menu of the backup input mode for each model >

*

For PT-DZ21K*/DS20K*/SDZ21KC/SDS20KC, PT-DZ13K*/DS12K*/SDZ985C/SDS955C

【OFF】　⇒　【1】　⇒　【2】

*

【OFF】　⇒　【ON】

3.

Select the [AUTOMATIC SWITCHING].

4.

Switch the [AUTOMATIC SWITCHING].

Disables the automatic input switching function.

【DISABLE】

【2】

The input is switched as seamless as possible when the same signal is
input to the primary and seconsary inputs.

Primar input is fixed to the <SDI IN 1> terminal, and the secondary input is
fixed to the <SDI IN 2> terminal.

For PT-DW17K*/SDW17KC, PT-DW11K*/DZ10K*/SDW935C/SDZ981C, PT-
DZ16K*/PT-SDZ18KC

When [BACKUP INPUT MODE] is set to OFF, [AUTOMATIC SWITCHING] can not be
selected.

【OFF】

【ON】/【1】

The input is switched as seamless as possible when the same signal is
input to the primary and seconsary inputs.

Primar input is fixed to the <DVI-D IN> terminal, and the secondary input is
fixed to the <HDMI IN> terminal.

3)

【ENABLE】

Switches to the secondary input automatically when the input signal for
promary input is disrupted.

There was a case that the REGISTERED SIGNAL LIST was not displayed and jumped to the
normal screen when a signal is deleted from the REGISTERED SIGNAL LIST that is not
receiving.
Program is modified to display the REGISTERED SIGNAL LIST after the non-used signal
was deleted.

DELETE

ENTER

DELETE

ENTER

- 2 -