KX-MB2230RU, KX-MB2270RU, KX-MB2510RU, KX-MB2540RU - Panasonic Copying Equipment Service Manual (repair manual). Page 119

119

KX-MB2230RU/ KX-MB2270RU/ KX-MB2510RU/ KX-MB2540RU

Panasonic Multi-Function Station software enables the unit to carry out the following functions:
- Printing on plain paper, thin and thick paper, labels, envelope and Japan postcard 
- Displaying the preview of the print image, changing the page order, deleting pages, and changing the print layout etc. before
printing (Easy Print Utility)
- Scanning documents and converting an image into text with OCR software
- Scanning from other applications for Microsoft

® 

Windows

®

 that support TWAIN scanning and WIA scanning (USB connection 

only)
- Storing, editing or erasing items in the address book using your computer
- Programming the features using your computer
- Sending, receiving fax documents using your computer (Fax supported models only)

• Install Multi-Function Station (CD-ROM) before connecting the unit to a computer with the USB cable. If the unit is con-

• Software features and appearance are subject to change without notice.

1 Start Windows and exit all other applications.

• You must be logged in as an administrator in order to install Multi-Function Station.

2 Insert the supplied CD-ROM into your CD-ROM drive.

• If the [Select Language] dialogue box appears, select the language that you want to use with this software. Click [OK].
• If the installation does not start automatically:

Click [Start]. Choose [Run... ]. Type “D:\Install” (where “D” is the drive letter of your CD-ROM drive). Click [OK ].
(If you are not sure what the drive letter is for your CD-ROM drive, use Windows Explorer and look for the CD-ROM drive.)

• The installation will start automatically.

4 When the setup program starts, follow the on-screen instructions.

• Easy Print Utility and Device Monitor will also be installed.

5 The [Connection Type] dialogue box appears.
For USB connection:

1. [Connect directly with a USB cable.] 

→[Next].

• The [Connect Device] dialogue box will appear.

2. Connect the unit to a computer with the USB cable (1), then click [Next].

• If the unit is connected to your computer, the model name will be automatically detected.
• You can change the name of the unit if necessary.

3. Click [Install], then follow the on-screen instructions. 

• The files will be copied to your computer.

1. [Connect via the Network.] 

→[Next].

• The [Select a Network Device] dialogue box will appear. 

2. Check [Select from the search list] and select the unit from the list.

• If the name of the desired unit is not displayed on the list, and the IP address for the unit has been assigned, check [Direct

input] and enter the IP address.

3. [Next].

• You can change the name of the unit if necessary.

4. Click [Install], then follow the on-screen instructions.

• The files will be copied to your computer.